Lazurblau 325i project thread

[TeXJ]

what about wiring? are there harness adapters? Can you just use the DME from the m60 car or do you need to make modifications to it?

[TheWipprSnappr]

M60 swap

I'm kind new to this big project planning stuff so here is my basic "parts list". I will more than likely just update this post as the swap progresses.
M60b40 - Probably wont do a full rebuild, but will do all new gaskets, seals, and other items that need attention. I'll find out more as I dig into it.

Drivetrain - 5speed box, ttv custom flywheel, s52 clutch kit. I've read an e36 328 manual driveshaft is the way to go, but does anyone know if these can be used on m6x swaps to retain the stock driveshaft? I've also currently got eyes on an open 2.93 diff (for now).

Cooling - currently have an s54 rad in the e30 right now, going to keep that. SPAL 16" pusher, temp sensor.

Exhaust - Havent started planning for this too much yet. Will work on this more when the time comes, but going to be using x5 4.4 manifolds from garagistic.

Fuel - Walbro 255lph in tank pump

Brakes - Currently have rx7 calipers and corrado rotors in storage, may go that route or sell and go with the Massive export kit here. Going with booster relocation, and have eyes on an e34 booster setup.

Suspension/chassis - Ultimate goal is ground control coilovers. Will be doing front and rear subframe reinforcement at some point, probably secondary diff mount. Replace all bushings with 80A poly.

I know there is a lot more that I'm not mentioning. I'm putting together a much more in depth "project journal", which I will be referring to, this post is just to outline my overall plan.

[wworm]

I'd say you're getting pretty sweet deals here. Thats a cheap donor.

[TheWipprSnappr]

They aren't flawless tho, they do have some rash.

[2mAn]

Yes, genuine style 65s

Those alone can nearly pay for the car

[TheWipprSnappr]

Your car is going to be sick with an m60. When do you think the swap is going to happen?

I haven't established a timeline yet. A lot of preparation still needs to be done, and more parts need to be acquired, it will be a long road ahead. But step one was actually finding a suitable engine and transmission.

you can have them bring you rollers as part of the sale, are they actual /M wheels?

Yes, genuine style 65s

[2mAn]

Ive been debating on a full part out or trying to get rid of the roller, definitely going to try and sell the m5 wheels.

you can have them bring you rollers as part of the sale, are they actual /M wheels?

It is, I think 2man was saying the e38 roller would make a good candidate for someone else to swap something in it.

correct, rather than getting stuck with a car with no motor, no wheels and half an interior, it could be a good roller for someone else who wants to do the S62 swap

[ThatM20Guy]

Your car is going to be sick with an m60. When do you think the swap is going to happen?

[TheWipprSnappr]

It is, I think 2man was saying the e38 roller would make a good candidate for someone else to swap something in it.

[Pootis]

M60 isn't going in your e30?

[TheWipprSnappr]

Ive been debating on a full part out or trying to get rid of the roller, definitely going to try and sell the m5 wheels.

[2mAn]

Sounds like a good candidate for a S62 swap... isnt there a shop that does that? Maybe they can just take the roller for most of what you paid for the car

[TheWipprSnappr]

That E38 looks like there is nothing wrong with it! lol

A lot you cant see in the photo. Rear trunk latch is broken and rear taillight is busted, heater core is bypassed because of leak (correctly though) and a/c doesn't work. Both front window motors don't work, battery is going bad and its got a warped rotor.

[2mAn]

That E38 looks like there is nothing wrong with it! lol

[White325is]

I used to run steel wheels on a lot of my e30s. Ill post a few photos once I figure out how to from my phone. lol