I haven't posted anything big in ages...
Collapse
X
-
I gotta check out the gearing on the Getrag tranny...Lol, i used to have a 3.73LSD, now that was rediculous!!!.
Go here:
RPM/MPH From Gear Ratio Calculator - by Wallace Racing Home of Pontiac Powered Firebirds,Trans Ams,Pontiac Powered Dragsters,Pontiac Power Rules!
Im assuming the e36 trannys have the same 5th gear ratio of 1:1 Stock tire size is 24.0 inches
I heard that it would be very nice for economy and spirited driving. I mean don't get me wrong this thing is the shit, but I may consider getting a 2.93.Leave a comment:
-
Lol, i used to have a 3.73LSD, now that was rediculous!!!.
Go here:
RPM/MPH From Gear Ratio Calculator - by Wallace Racing Home of Pontiac Powered Firebirds,Trans Ams,Pontiac Powered Dragsters,Pontiac Power Rules!
Im assuming the e36 trannys have the same 5th gear ratio of 1:1 Stock tire size is 24.0 inchesLeave a comment:
-
Really? I was hoping to be at closer to 75 at that rpm. I'm nearly at 4k @ 80...
That is going to give me some shitty fuel economy :(
Anyways some pics and vid!
The signature stuff:


Video of Sam driving:
Last edited by dude8383; 08-13-2010, 11:47 AM.Leave a comment:
-
What tacho you using? You have the 6cylinder coding plug in there?
I wanna say im at about 3k at 65 ish so you not that far off.Leave a comment:
-
It runs!!!!!!!!!!!!!!!
I will have pics and a short video clip up shortly. I have the 325i coding plug but the rpm is still off. When I hit 7,000rpm the needle bounces of and the car keeps going. I have no idea what redline is.
That being said it sounds fantastic all the way up there!
Oh and I know the tach is off because @ 60 I'm cruising at about 3500 rpm which impossible with the gearing.
Getrag 250 and 3.25LSDLeave a comment:
-
For the sake of keeping everything in one thread
Started it today!!!!!
That dash of oil helped fire this thing up like nobody's business.
I'll have the video up shortly! It sounds pretty good to me, but I can barely tell cause this thing is so flippin loud.
It won't idle though so I need to look into why...me thinks it is the M44 318i MAF
Leave a comment:
-
okay, so this thing won't bloody start...
i have fuel, i have current going to coil and definitely have vacuum.
i check robertk's thread about the auto tranny switch (pin 65 on ecu) and provided a 12v current and still nothing.
also i just read his thread and will attempt to pull the coil pack and actually plug the spark plug into it and then crank to see if spark plug is actually getting current.
it also has the EWS delete chip.
here are two vid's of how it cranks:
Leave a comment:
-
haha dude you have no idea... can't wait for tomorrow to come around!Leave a comment:
-
hope it all works out, i was so exceited right before i got my swap running. I would drive 20 mins to my garage just to look at it... even though i was still waiting on parts lol I betch cant wait to get it runningLeave a comment:
-
Short update.
I got my brake booster and EWS delete chip.
I shall start it this weekend, as long as everything goes according to plan.Leave a comment:
-
Yeh man I didn't really feel like gambling on this one.
haha From what I have learned it doesn't really matter but then again... the harness only allows them to be hooked up ONE way.
not quite sure what you mean because the bottom portion can be easily reinstalled either way. the top portion is a royal bitch.
thank you! I ordered my EWS delete from TRM :)Leave a comment:
-
You should have put the bottom back on the steering column before installing the dash. It makes it much easier to do.Leave a comment:
-
Good job man!!! Did you make sure your knock sensors are connected in the right order? Just checking :)Leave a comment:

Leave a comment: