!!!!!Caution M20 porn inside!!!!!

[rs4pro3]

manifold adapters? I just cut up a stock intake manifold and machined the runners to be round on the outside.
Thanks Dave, Ya everything I've been doing has just been with a drill, drill press, grinder, and sawzall. If i had a Mill and lathe in the garage i'd be making some crazy chit. I should of gotten around to making some stuff at my old job, but I was too busy working, and making parts for the machine we were building.

[Dave]

I think i am going to go out on a limb here and say that Ely most likely made those adapters using a stock intake as a donor.

With a real budget and access to serious tools, dude could be scary.

Color me impressed.

[Jesse30]

thats pretty bad ass. might i ask where you got the manifold adapters? i have no problem fabbing stuff at all :)

pm me if you would like.

[Van Westervelt]

I like.

[rs4pro3]

Made a vacuum manifold to bring the vacuum from each runner to a single point to run to the MAP sensor in the megasquirt ECU

[rs4pro3]

I've got a bunch of ABS plastic I'm going to make the plenum out of. And ya I'm just going to use the stock fuel rail. I'll have to make some small brackets to hold it in place but no biggy.

[Mike]

Thats awesome.What will you make the plentum out of? I assume your oe fuel rail will be used, correct?

[rs4pro3]

Sorry guys no write up is in the works, there is way too much custom fabed stuff. Heck this is the 3-rd time now I've tried to make a set and this is the best one so far.

[Lazr111]

Ok this is hott and ghetto all at the same time. I'm demanding a write up:hitler: and a complete parts list after you got it all installed and functional.

x2 por favor?

These are sweet...8)

[rs4pro3]

34mm Bing throttles

[Yakinho]

What mm are the throttle bodies?

[badvibrations]

Ok this is hott and ghetto all at the same time. I'm demanding a write up:hitler: and a complete parts list after you got it all installed and functional.

[rs4pro3]

Yep throttles of BMW motorcycles. Super easy to mount up, plus they use the same TPS as an m30 so that makes that a snap.

Here are some more pics of them bolted up to my mock up engine

[monty]

I have been wanting ITB's but not willing to spend 2800 or what ever BMP sells em for, nice work. Are they motorcycle TB's?

[moatilliatta]

What are the tb's off of?