User Profile

[moatilliatta]

looks like they hold a cable or something

[moatilliatta]

WHATS UP YOU TUBEEEEE!?!?!? - "Closes browser tab"...

Many things in life have changed, lust for the e30 remains the same....

[moatilliatta]

OH man.. those are going to suck to tighten. Check out the IE serrated ones, every serration is about .25 degree adjustment, and they fit into slots so they are easy to tighten.

https://...

[moatilliatta]

NICE!

Bummer about your buddies E36. At least it wasn't too bad.

Nasa Time trial looks interesting, something I may try.

What was your best around RA?
...

[moatilliatta]

I wonder if the pan is squished or something, shows using the same gasket as all M20's Minus an iX.
http://bmwfans.info/parts-catalog/11131730234/

[moatilliatta]

Ah. my fault... I've had luck with the basic ones from autozone on the M20. Threaded push with 2 stamped steel clampers....

[moatilliatta]

Technically both. The muffler mounting rubber being backwards moved the through bolt rewards soaking up all the expansion room, looks like it would have to be cut and re welded... BUT..

The...

[moatilliatta]

The factory damper is pretty good.

Jb racing Chromoly
clutch master 2.5

Assuming your going with the ZF320 box?

The wood-roof keys in the oil pumps like to...

[moatilliatta]

A lot of the bigger BBK need the casting on the outer ball joint of the control arms ground down.


A good rule of thumb is 10PSI per 1K RPM, Some spec E30 guys run the bigger sump pan,...

[moatilliatta]

/ Thread

https://metricmechanic.com/diy-tools/


I cut this in half and do a cylinder at a time....

[moatilliatta]

Tech tip, exhaust hangers are backwards, the through bolt should be closer to the front of front for exhaust expansion. If you system wobbles to much you can add the reinforcement that is on the e36 M3....

[moatilliatta]

Yeah, it’s always nice to have an E30 around to drive. E30 withdraw sucks.

[moatilliatta]

Why not just sell everything and get the M3 running?

Yes, come down to The Vintage this year ready or not. It’s such a great event!

[moatilliatta]

I really like them but I would say it’s a hard guarantee that used ones are probably blown and will need replaced. But on my current build and this point I’m time it left me for more.

...

[moatilliatta]

The local dealer offers BMWCCA discounts.

blunttech and getbmwparts are some cool dudes, but the locals need some support also....

[moatilliatta]

Another vote here.

Sachs HD pressure plate added if you’re feeling like you might track intensely more.

The SMF factory kit should have a sprung hub clutch disk.
...

[moatilliatta]

Those who are doing this in their E30 and have to do it repeatedly. AAF and AKG makes a nice ADJ rear link so you don’t have to unbolt the bracket.

Thanks for sharing what a lot of people...

[moatilliatta]

Yeah, I think ill have to dig and sort for a later module that’ll support the delay. I have mine wired up, but it doesn’t delay.. or my module is broken..

I even put the door handle on...