salvage beast(not really)

[kamotors]

okay i tried using the hair dryer and air duster thing to remove some dents but it didn't work. how do i remove dents that are poking out? its really wierd its on my hood and on the inside of the hood its also pocking out its like there was a mini explosion inside the metal.

[Danny]

Bfh

[kamotors]

no matter what i do the bumper wont get aligned right, it was like this before, but its annoying.

[Danny]

It might be your sliders dawg.

Take off your bumper and adjust them.

[kamotors]

It might be your sliders dawg.

Take off your bumper and adjust them.

i tried i moved it all the way back and it still looks like this..URRRRRRRGHHHHHH

[Danny]

Bfh.

I'm tellin ya.

[kamotors]

got my 10 day permit now i'm going for a nice drive, i've only driven ~10miles all summer

[kamotors]

went for a nice drive, but about halfway through the drive i noticed my temp go to the white line before the red while i was at a stop light, so i took the free way home a noticed that the car didn't get much cooler, so i popped the hood and realized the electric fan wasn't even spinning so i took out the key messed around with things, put the key back in and then the fan started spinning but 10 seconds later it stopped, so i checked al the connections, and one of them was slightly loose, so i pushed it in and now the fan spins, i'll redo all the connections tommorow(the fan is now connected to washer pump), also i painted the inside of the hood red, and it turned out pretty good, i even clear coated it, and i have hood insulation so everything everything should last, when i was washing the top of the hood i found a new dent, and i dont know how it got there, I guess i'll go get some more air duster cans.

[bimmer_E30]

hahahah nice man.

[TDE30]

What's black, white, red all over, and soon to catch on fire?

Hehe, j/k.

[kamotors]

What's black, white, red all over, and soon to catch on fire?

Hehe, j/k.

there was smoke buts thats because one of my valve cover bolts got loose and some oil hit the exhaust.

[atomic]

okay i tried using the hair dryer and air duster thing to remove some dents but it didn't work. how do i remove dents that are poking out? its really wierd its on my hood and on the inside of the hood its also pocking out its like there was a mini explosion inside the metal.

Maybe the opposite of what you would do to get a dent out that goes the other direction....


Or doing hand stands works too while taking them out....




;)

[kamotors]

Maybe the opposite of what you would do to get a dent out that goes the other direction....


Or doing hand stands works too while taking them out....




;)

air duster does work, just not super good, the 2 outy dents are smaller now they went from pointy to round, tommorow ill go get some more air dusters and see if they can shrink a little more. i'll try doing a hand stand a maybe i'll get better results.

[sticksdaman]

this is easily the most boring annoying thread ever

[Danny]

this is easily the most boring annoying thread ever

Hi!