Bumper swap time! ya!
Collapse
X
-
Nice!! I might be out and about sometime tomorrow..but I want to stop by for the front bumper. -
Tonight i got the rear bumper mounted with only a few small adjustments to be made now. I need to find some better hardware to hold the ends of the bumper on and fab up a brace that holds the lower part of the valence in place so i doesent flap around like a cheap bodykit at speeds.
My dad is not very enthusiastic about the swap. He prefers his E30s bone stock.

Yes jeff i am going to need to find some skirts sometime but they wont be in teh werkz for a while.

My euro trim set with the rear centerpiece should arrive tuesday.

The front will be addressed tomorrow if all goes well.
Leave a comment:
-
hey look...ITS ME!
oh, btw..i texted mayhem to give me his springs. i will put them to good use.Leave a comment:
-
Early this morning i did some final modifications in order to get the rear bumper on.
I had to notch out the bottom of the bumper core to clear the mounting hardware for the valence.

I filled in the holes for the diving board shroud with grommets and plastic plugs.

The two on the sides were too big for the plastic plugs so i ended up putting grommets in there and filling the holes with silicone goop.

Reppin came by to help me hang the rear bumper to see if i need to do any more modifications before i mounted it.
The holes that the ends of the bumper are supposed to bolt to dont really line up so i might have to fab up some kind of bracket, and i might have to space out the bumper shocks for the bumper skin to attach correctly. BTdub thanks to watson and joe for the rear bumper shock:up:

I think i got reppins approval.
Leave a comment:
-
-
Nice thread dude....
Sorry you had to wait last night the parents were doodlingLeave a comment:
-
Riding ghetto for today. Going to go pick up the bumper shock ive been needing then hopefully installing the bumper tonight.

Going to look a little more like my dads soon:D
Leave a comment:
-
Tonight i liberated my E30 of its diving boards (for the weight savings of course)
Honestly this is the most i have taken the body apart. Hopefully i can track down a rear bumper shock tomorrow so i dont have to ride ghetto for too long.
Diving board be gone!

Ya it was tucked a little

Got a little dirty behind the plate filler

The good doctor came by for a visit

We held up the rear bumper to see how its going to look, Its going to be goooooood!:nice:Leave a comment:
-
-
Got the rear valence/bumper together tonight. It will go on as soon as i can get a rear bumper shock local.


Euro trim is on the way:DLeave a comment:
-
Put the front bumper mostly together tonight.
Had to modify the turn signal housing to make the MHW lenses fit right


My dad has mad speed lines from driving turbofast!
Leave a comment:
-
ha ha yeah, well as soon as I find $1500 in change in my couch, I'll get right on it :)Leave a comment:

Leave a comment: