^^ Maybe there's some coke stashed away in hidden compartments to help finance all the work!
Saw this in a Jalopnik piece - Start up instructions for customer 962's from Andial....
Here are some helpful instructions before you start or run the car:
Starting: Turn the mixture knob four clicks to the right and start without pumping the throttle. As soon as the engine starts keep the rpm at 2200 - 3000, and turn the knob slowly towards the green point again. If you turn it too fast, the engine will not run properly.
Do not to leave the switch in the last two R/S positions for too long.
The mixture at these set points is too rich and will foul the spark plugs.
Running: When the engine is warm, adjust the boost with the knob between 7500 - 7800 rpm in 4th or 5th gear. The boost gauge should read between 1.15 and 1.25 bar. It will increase slightly during the lower rpm range.
You can adjust the mixture switch rich (R/S) or lean (L/S) to achieve maximum performance, but I would not recommend changing it more than two clicks either way.
Data: Shift RPM = 7800; Top RPM = 8000; Rev limiter = 8300.
Saw this in a Jalopnik piece - Start up instructions for customer 962's from Andial....
Here are some helpful instructions before you start or run the car:
Starting: Turn the mixture knob four clicks to the right and start without pumping the throttle. As soon as the engine starts keep the rpm at 2200 - 3000, and turn the knob slowly towards the green point again. If you turn it too fast, the engine will not run properly.
Do not to leave the switch in the last two R/S positions for too long.
The mixture at these set points is too rich and will foul the spark plugs.
Running: When the engine is warm, adjust the boost with the knob between 7500 - 7800 rpm in 4th or 5th gear. The boost gauge should read between 1.15 and 1.25 bar. It will increase slightly during the lower rpm range.
You can adjust the mixture switch rich (R/S) or lean (L/S) to achieve maximum performance, but I would not recommend changing it more than two clicks either way.
Data: Shift RPM = 7800; Top RPM = 8000; Rev limiter = 8300.
Comment