Some1 done the v8 maf to m42 fitment??

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Fidhle007
    replied
    Originally posted by hyperE30
    take some reading classes, it might help.


    Here, i have a m60 maf, i was wondering if it could be set up to the m42 maf, or afm is thats the case, so would this work or should i discard the headache now.??
    Sure. Red wire to green wire, just like George said.

    I was probably reading before you were born, just so we're clear on this...

    Leave a comment:


  • imsotyerred
    replied
    *pulls up a chair and whips out the popcorn*

    Leave a comment:


  • hyperE30
    replied
    take some reading classes, it might help.


    Here, i have a m60 maf, i was wondering if it could be set up to the m42 maf, or afm is thats the case, so would this work or should i discard the headache now.??

    Leave a comment:


  • Ral
    replied
    1. See George Graves' post.

    2. stop bickering

    3. /thread

    Leave a comment:


  • Fidhle007
    replied
    Originally posted by hyperE30
    :wgaf:: you are very funny my friend...
    And you don't make a goddamn bit of sense. Start typing in a comprehensible manner and I'll try to answer your questions. I've been a BMW tech for three years, I've picked up a few things along the way and could probably help you but not if I can't fucking understand you...

    Leave a comment:


  • hyperE30
    replied
    :wgaf:: you are very funny my friend...

    Leave a comment:


  • Fidhle007
    replied
    Originally posted by hyperE30
    oh ow, well i am amazed, who cares on how people writte, only morons think they know it all, but cool, all i did was ask for help dont need your whole teaching lessons, and its from a m60 eng. i am sure you are so great with english. so i didnt remember the motor size so there you go now, thats that help?? so everyone needs help in a way, something new is learned everyday. None of your little lessons will offend me or will make me think bad, no one is perfect for that reason people can be corrected in a good manner of help.
    What?

    Leave a comment:


  • hyperE30
    replied
    oh ow, well i am amazed, who cares on how people writte, only morons think they know it all, but cool, all i did was ask for help dont need your whole teaching lessons, and its from a m60 eng. i am sure you are so great with english. so i didnt remember the motor size so there you go now, thats that help?? so everyone needs help in a way, something new is learned everyday. None of your little lessons will offend me or will make me think bad, no one is perfect for that reason people can be corrected in a good manner of help.

    Leave a comment:


  • george graves
    replied
    Originally posted by Fidhle007
    Copping a n00bitude...
    Hey Fiddle - this is a noobocracy not a noobtatorship.

    And OP - all you have to do is connect the green wire to the red wire to get it to work. Go ahead and buy one already. It bolts right up.

    Leave a comment:


  • Fidhle007
    replied
    Originally posted by hyperE30
    ohh definitely..
    The more you write, the more I laugh.

    Originally posted by hyperE30
    but anyway. it was a simple no it wont wrk or it might or try it, but thanks anyway.
    Look kid, you come on here with a slim grasp on the English language and post a barely comprehensible question that is missing large pieces of critical information and expect everyone to be your personal techs? For starters, WHY do you need the uprade? WHAT MOTOR is this V8 MAF from? What is your level of tuning and wiring knowledge?

    Based on your mastery of the English Language we've already made assumptions about the answers to most of those questions but perhaps you could surprise us by offering up a little needed information so that we can better help you. Copping a n00bitude like you did will only get you ridiculed and eventually banned. Play nice and don't be a moron and we'll let you stay.

    Leave a comment:


  • hyperE30
    replied
    but anyway. it was a simple no it wont wrk or it might or try it, but thanks anyway.

    Leave a comment:


  • hyperE30
    replied
    Originally posted by Fidhle007
    Thank God I live in a free country with well-funded school systems...

    ohh definitely..

    Leave a comment:


  • Fidhle007
    replied
    Originally posted by hyperE30
    Has the mark D. Plus if any of thos "A.H" haven't done it why comment. If you have nothin to help with or not interested in helpin might as well an don't say notthin an let some1 that runs with one or if it its possible if not well forget the try. It does not cost anything to ask for somethin. I'm sure any of you have asked for somethin you didn't know. So go ahead an feel smart I'm sure makes you better dan de rest on the forum or out there in the world.....
    Thank God I live in a free country with well-funded school systems...

    Leave a comment:


  • Massive Lee
    replied
    Hey Hypere30, please refer to post #9. You will most likely find your answer to "Some1 done the v8 maf to m42 fitment??"

    Leave a comment:


  • hyperE30
    replied
    Has the mark D. Plus if any of thos "A.H" haven't done it why comment. If you have nothin to help with or not interested in helpin might as well an don't say notthin an let some1 that runs with one or if it its possible if not well forget the try. It does not cost anything to ask for somethin. I'm sure any of you have asked for somethin you didn't know. So go ahead an feel smart I'm sure makes you better dan de rest on the forum or out there in the world.....

    Leave a comment:

Working...