What projects do you have guys have lined up for the break?

[der affe]

Sadly, staring at the: powder coated rear sub frame, poly bushings i made to raise it 12mm along with the spacers for the diff, extra diff cover with aluminum bushing, ss brake lines, RX-7 brakes, Stahl long tubes, coilover kits, oil filter relocation kit, semi finished euro elips with real bi xenon, urathane steering puck, maybe my roll cage and what ever else i was going to do.

Found out yesterday i have the first surgery for my last proceedure on my wrist on the 29th of December. That means 4 months of one hand in a bandage and 2 surgeries in that time and everything getting put off until after the stitches and staples come out.

[Chaz]

Looks like you got a lot of work to do in the next 6 days.
I get to install my smoked and cross haired elips I got from my secret Santa.

[gp.plus]

Building a proper exhaust for my swap, right now my headers go into pep boys flex pipes to the blown out stock e30 exhaust. Doing X to mid muffler and finishing with an e36 m3 muffler.

Also doing an e36 rack swap and clutch slave w/uuc braided line

[priapism]

I'm thinking about building a splitter for the race car. But I don't fully understand the aerodynamics behind it, so I want to read up a bunch on it before I start.

Also I need to bolt a passenger seat in the passenger side of the race car for the school I'm going to. And source a seat belt.

[priapism]

Job interview at Tesla motors. Studying up for that shit is gonna be a project in itself.

Sweet! At corporate or a dealer? Good luck mang!

[MikeDE]

Weld my exhaust, install the phenolic spacer & Bosch gen3's on the M42. And possibly install a new diff bushing and E28 motor mounts.

Insulate the attic, clean out my workroom in the basement & list all extra e30 parts(keep an eye on the FS forum) so I can get my HK(USP/P8/P30?) next month.

[110stx]

Try replacing the oil pressure relief valve first.

Say, I need a bit more help here.

Would the pressure relief valve be:

No. 5 in this RealOEM diagram?

http://www.realoem.com/bmw/showparts.do?model=AF93&mospid=47305&btnr=11_0504&hg=11&fg=30

Thanks again.
dh

[Charley]

Fix the e38 when my parts get here. Then get it ready to haul
5 guys for a 5 day ski trip in the Chic-Chocs.

I may also move just before school starts.

Sent from my HTC Incredible S using Tapatalk

[DTFE30]

Just installed an E36 318ti antenna base with an ECS Tuning stubby antenna and also got rid of the electrical gremlin thats been pissing me off for the last month..

[z31maniac]

Say, I need a bit more help here.

Would the pressure relief valve be:

No. 5 in this RealOEM diagram?

http://www.realoem.com/bmw/showparts.do?model=AF93&mospid=47305&btnr=11_0504&hg=11&fg=30

Thanks again.
dh

Yep, go ahead and buy 5,6,7 and 8. Replace them all.

[110stx]

Yep, go ahead and buy 5,6,7 and 8. Replace them all.

Roger that. It appears that they come as a unit, but I'll make sure.

Sure do appreciate it the assist!

[Fusion]

Installing a 24V diesel Webasto air heater in my DD.
I fukn hate winter.

[Toadleg]

Working on new A arms and m3 offset bushings and new sway bar linkage. Trying to get ready for AutoX on Friday

[LJ851]

Found out yesterday i have the first surgery for my last proceedure on my wrist on the 29th of December. That means 4 months of one hand in a bandage and 2 surgeries in that time and everything getting put off until after the stitches and staples come out.

Best of luck on your surgery, i hope it is everything you want it to be. Happy Holidays Greg.

[4bangerfury]

Not much time for e30 work. I need to finish up a friend's e28 first. I am picking up a metal lathe next week though. Should be fun to relearn how to use it.