White Wheel Chop

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Stephen
    replied
    ^ i jut did that, but one at a time.. dont even need jackstands

    Leave a comment:


  • 32.5i
    replied
    do you have 4 jackstands?

    -get all wheels off
    -sand each wheels fairly well (at least scuff em up so the paint will stick
    -WASH them VERY well..
    -dry
    -tape off tires
    -lay down 1-2 coats of primer
    -1-2 coats of color
    -1-2 coats of clear (if desired)
    -let dry and re-install

    Leave a comment:


  • aschroeder92
    replied
    Hmm. Well I think I'll paint them white temporarily, leave them white if it looks good, or respray them in silver when I get a chance. What would be the best way to paint my wheels if I don't have another set to ride on while they are being done?

    Leave a comment:


  • JasonC
    replied
    I often wondered what white wheels would look like on burgundort.... But a cheaper way to look 1000x's better is a set of stock silver weaves. They look really good on burgundort.

    Leave a comment:


  • Stephen
    replied
    ^ pretty much yeah. i dont think i have and directly side on shots of my white caps either. I say go a dark silver or even burgondort haha

    Leave a comment:


  • 32.5i
    replied
    black to white = impossible

    Leave a comment:


  • aschroeder92
    replied
    And I just realized no one has chopped my wheels white yet... haha.

    Leave a comment:


  • aschroeder92
    replied
    I would but moneyz are tight at the moment :(

    Leave a comment:


  • Stephen
    replied
    Go more oldschool with burgundort. Euroweaves, ronals, something classy

    Leave a comment:


  • 87e30
    replied
    Originally posted by aschroeder92
    Moar low in the rear is hopefully coming soon, then wheels. I was thinking maybe some slipstreams, or some old school mesh with some dish.
    There shouldn't be a comparison here. Super common civic wheel or a more rare wheel with a rwd offset. Hmm....

    Leave a comment:


  • aschroeder92
    replied
    Moar low in the rear is hopefully coming soon, then wheels. I was thinking maybe some slipstreams, or some old school mesh with some dish.

    Leave a comment:


  • MG325i
    replied
    Originally posted by Stephen
    I like white caps, but i think with burgundort, there are better options
    +1 white caps look good on some other colors.
    i personally think, black, gunmetal, or a dark bronze would look good. or maybe a wheel with a polished lip with a dark color on the inside.

    Leave a comment:


  • Stephen
    replied
    I like white caps, but i think with burgundort, there are better options

    Leave a comment:


  • 87e30
    replied
    See sig. :D

    Leave a comment:


  • MG325i
    replied
    i personally like the black bottlecaps with your car.
    just needs to be lowerrrrr

    Leave a comment:

Working...