White Wheel Chop

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • aschroeder92
    replied
    Originally posted by Stephen
    too bad i asked me :D


    I have some ill post up
    Haha it's all good, all pictures are welcome :D

    Leave a comment:


  • e30this
    replied
    Who needs a chop, I will show you how they looked on my car...






    Originally posted by aschroeder92
    Anyone feel like chopping the other things I asked for? (sidemarker delete, moar low in the back, these in white if you feel like it :D)

    Leave a comment:


  • Stephen
    replied
    too bad i asked me :D


    I have some ill post up

    Leave a comment:


  • 87e30
    replied
    Originally posted by aschroeder92
    Just out of curiosity, do you have any more pictures of your wheels? On the car or not doesn't matter much.
    Umm... I'm waiting for some better pictures. I don't have any good ones that show the wheels. I need to take a shoot soon.

    Leave a comment:


  • aschroeder92
    replied
    Originally posted by Stephen
    try scuffing anything with grit over 600

    The point being sandpaper is treid and true
    Just out of curiosity, do you have any more pictures of your wheels? On the car or not doesn't matter much.

    Leave a comment:


  • 87e30
    replied
    Originally posted by Stephen
    try scuffing anything with grit over 600

    The point being sandpaper is treid and true
    Steel wool worked well for me and the guy who helped me always uses steel wool. I dunno it's just easy and scrubs the old paint off really well.

    Leave a comment:


  • Stephen
    replied
    try scuffing anything with grit over 600

    The point being sandpaper is treid and true

    Leave a comment:


  • 87e30
    replied
    Originally posted by aschroeder92
    Sounds good man thanks. I absolutely love your car BTW :D
    Thanks man.

    Leave a comment:


  • 87e30
    replied
    Originally posted by Stephen
    Dont use steel wool on bottlecaps, might rough it up too much, sandpaper will be fine
    Since when is steal wool more rough than sandpaper?

    Leave a comment:


  • aschroeder92
    replied
    Originally posted by 87e30
    I did 2 cans of primer and one can of base and one can of clear. I used duplicolor wheel paint I believe.

    The stripper takes the paint off the wheel, although you don't need ALL of it off, just smooth the wheel out. The steel wool roughs it up, I sprayed the stripper on with a spray bottle and then used steel wool to rub the paint off.

    And yeah, I painted with the tires on and masked the tires off. I did a bad job though and put stripper on a rag and rubbed off the paint that got on the tires.

    It's just bottle caps dude, if you don't like the results try again!
    Sounds good man thanks. I absolutely love your car BTW :D

    Leave a comment:


  • Stephen
    replied
    Dont use steel wool on bottlecaps, might rough it up too much, sandpaper will be fine

    Leave a comment:


  • 87e30
    replied
    Originally posted by aschroeder92
    So how many cans of paint, steel wool, etc. did you use? How would this work if there is already paint on the wheels... One last question. Would it be fine to just paint them with the tires on? I wouldn't want the stripper to mess anything up
    I did 2 cans of primer and one can of base and one can of clear. I used duplicolor wheel paint I believe.

    The stripper takes the paint off the wheel, although you don't need ALL of it off, just smooth the wheel out. The steel wool roughs it up, I sprayed the stripper on with a spray bottle and then used steel wool to rub the paint off.

    And yeah, I painted with the tires on and masked the tires off. I did a bad job though and put stripper on a rag and rubbed off the paint that got on the tires.

    It's just bottle caps dude, if you don't like the results try again!

    Leave a comment:


  • aschroeder92
    replied
    Originally posted by 87e30
    I used four jackstands. Steel wool, some aircraft paint stripper, a lot of scrubbing. Then got the surface fairly smooth (My wheels have HUGE gouges in them ) to get the paint off.

    Then I did 3 coats of white primer. 2 coats of base. 2 coats of clear. I'm pleased. I've heard not to get the cheapest shittiest paint too.
    So how many cans of paint, steel wool, etc. did you use? How would this work if there is already paint on the wheels... One last question. Would it be fine to just paint them with the tires on? I wouldn't want the stripper to mess anything up

    Leave a comment:


  • 87e30
    replied
    Originally posted by 32.5i
    do you have 4 jackstands?

    -get all wheels off
    -sand each wheels fairly well (at least scuff em up so the paint will stick
    -WASH them VERY well..
    -dry
    -tape off tires
    -lay down 1-2 coats of primer
    -1-2 coats of color
    -1-2 coats of clear (if desired)
    -let dry and re-install
    I used four jackstands. Steel wool, some aircraft paint stripper, a lot of scrubbing. Then got the surface fairly smooth (My wheels have HUGE gouges in them ) to get the paint off.

    Then I did 3 coats of white primer. 2 coats of base. 2 coats of clear. I'm pleased. I've heard not to get the cheapest shittiest paint too.

    Leave a comment:


  • aschroeder92
    replied
    Anyone feel like chopping the other things I asked for? (sidemarker delete, moar low in the back, these in white if you feel like it :D)

    Leave a comment:

Working...