Announcement

Collapse
No announcement yet.

Race seat for a bigger guy.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 91Saleen#15
    replied
    Originally posted by CrazyB View Post
    Well i think i decided to go the cheaper route. i will get the fx1 or forza not sure whihc one for right now as I will mainly be doing local auto X and when i start going to the track I will put the corbeau into the passenger slot and get a nice seat for me, as the corbeau is still way lighter then stock and I want to have two seats in the car.
    Only thing now to figure out if i should get the froza or FX1 as FX1 is fiberglass but forza uses a tube chassie so I figure for a cheap seat the tube chassie might be better as it is more in line with the price.
    I'm 6'2", and have worn 40 inch waist in the past. I've had Forza 2s in both my 90 e30 and my 98 M3. I've driven both cars multiple times from Provo, Utah to races down in Vegas, which is a 5 hour drive at 80 miles per hour. I've never felt that the seats were terribly uncomfortable. They're not like stock seats, but I can't remember ever thinking to myself that the seats were worse than they should be. The only problem with the Forza 2's is that they don't tilt forward. If you have to carry tires in your rear seat, it can be difficult to get them in.

    At the moment, my Forza 2s have been transplanted to my C5 Z06, not because they were my first choice for that car, but because coincidentally, they happen to be one of the few seats narrow enough to fit in a C5.

    Leave a comment:


  • E30_fiend
    replied
    Ive driven to San Diego and back with the Forza 2's and had no problems. I drive to and from LA about twice a month. FYI SD is about 300 miles from me and LA is about 85.

    You will not be unsatisfied with the Forza 2. The only thing I dont like about them is the fact that they are bottom mount not side mount. So making a bracket for them was kinda difficult but I am very happy otherwise.


    Oh and I dont mean to thread jack but does anyone know who makes bottom mounts for a corbeau seat? Mine is basically bolted to the floor with the exception of a few big washers for spacing.







    Taylor

    Leave a comment:


  • Erick
    replied
    I have a wide version. Massive's brackets on stock rails.

    Leave a comment:


  • CrazyB
    replied
    Well i think i decided to go the cheaper route. i will get the fx1 or forza not sure whihc one for right now as I will mainly be doing local auto X and when i start going to the track I will put the corbeau into the passenger slot and get a nice seat for me, as the corbeau is still way lighter then stock and I want to have two seats in the car.
    Only thing now to figure out if i should get the froza or FX1 as FX1 is fiberglass but forza uses a tube chassie so I figure for a cheap seat the tube chassie might be better as it is more in line with the price.

    Leave a comment:


  • wolfgangstbd
    replied
    my brothers buddy club feels like its made out of rubber haha but it is actually really comfortable

    Leave a comment:


  • PaintPro21
    replied
    momo makes a wide hans seat if i remember correctly.

    Leave a comment:


  • CrazyB
    replied
    Awesome did you mount the side mounts to the stock rails or did you get some 90 degree aluminum pates, also do you have the wide version or the standard version fo the seat?

    Leave a comment:


  • Erick
    replied
    It's a side mount seat. I'm using Massive Lee's side mounts. I have yet to sit lower in an e30 than what I have in my car.

    And I can still go two steps lower than that even.

    I'm 6'2"
    Attached Files

    Leave a comment:


  • CrazyB
    replied
    I guess I will have to really look into this, aslo how do you have your buddy club seat mounted?

    Leave a comment:


  • Erick
    replied
    I dunno how big is a 40 waist, but I've had some fairly big guys sit on my Buddy Club and they fit very nicely.

    By very nicely I mean they fit right. No extra space to move around, with perfect support everywhere and huge leg bolsters.

    Leave a comment:


  • CrazyB
    replied
    Jere is the dimension for forza wide

    So the seat is 505mm instead of 415 which is quite a difference

    Leave a comment:


  • Erick
    replied


    That's the wide version.

    Leave a comment:


  • CrazyB
    replied
    will the buddy club fir someone with 40 inch waist, as I am unable to find the info anywhere.
    I did notice people saying that standard size is for 32 inch waist so i figured the wide was for someone a little bigger as dimensions on the seat are way smaller then the forza or FX1 wide.

    Leave a comment:


  • Erick
    replied
    Originally posted by ldsbeaker View Post
    Buddy Club. They have a big boy one.

    Sits LOOOOWWWW....
    Quoted for truth. My buddy club is one of the most awesome things in my car.

    Leave a comment:


  • CrazyB
    replied
    So looks like the corbeau wide are the only seat on the budget that will fit me. I liked the buddy club seats but looks like their wide version would be too small as the standard version is for 32 in waist is there any issues fitting the fx1 wide in the e30?

    Leave a comment:

Working...
X