Bilstein Sport with Coilover question
Collapse
X
-
Your shocks may be blown. Bilsteins run with H&R Race springs at 570 in the rear. Or are you so low you are hitting the bump stops perhaps?Leave a comment:
-
Well this thread proves it for me. My rear end bounces with 500# springs, and my shock mounts are fine, as well as poly sub frame and TA bushings. I guess i need to give bilstein a call.Leave a comment:
-
Nope.
I have no intentions of revalving mine--when I want a real spring rate, I will get real suspension.Leave a comment:
-
-
-
i have 800/1000, i know my billies need to be revalved.
anybody know how much it cost to revalve them?Leave a comment:
-
-
I had 500/650 with my bilstein sports, probably can't go much higher than that though. Maybe think about using Koni inserts instead?Leave a comment:
-
I agree... My 400/700 is fine for daily driving. Can be a tad harsh depending on the road conditions, but I would want higher spring rates if I knew the surface was going to be more optimal.
Now, correct me if I'm wrong, because this is just a guess, but if you go too high with your rates would this hurt you by causing the car to be a tad unpredictable? I was thinking high rates on a track may be good because it's usually smooth, fluid movements. But with autocross, the higher rates may upset the car with quick, jerky direction changesLeave a comment:
-
-
Woops, edited because you edited.call me and I'll explain.
But here is the short, but still complicated version.
there are two worlds. the perfect world and the real world.
The perfect world is where you choose a spring to match a shock, or vice versa and it works because they match.
But in the real world, the damping and the rate may "match", but there are other things that are working against you.
On an e30 with Bilsteins, you have the spectre of bottoming always hanging around. It wont go away. You have to minimize it.
In order to make the car go faster, you have to do have two wrongs make a right. If you go too high on the springs, the struts won't dampen correctly, HOWEVER, the car won't be bottoming out which would be worse.
So an e30 with the wrong springs will be FASTER than a car with the right springs.
There is an analogy regarding wimmens in here somewhere, but I will leave that to someone else.Leave a comment:
-
call me and I'll explain.
But here is the short, but still complicated version.
there are two worlds. the perfect world and the real world.
The perfect world is where you choose a spring to match a shock, or vice versa and it works because they match. Everybody is happy puppy rainbows.
But in the real world, the damping and the rate may "match", but there are other things that are working against you.
On an e30 with Bilsteins, you have the spectre of bottoming out, always hanging around. It wont go away. You have to minimize it.
In order to make the car go faster, you have to do have two wrongs make a right. If you go too high on the springs, the struts won't dampen correctly, HOWEVER, the car won't be bottoming out which would be worse.
So an e30 with the wrong springs will be FASTER than a car with the right springs.
There is an analogy regarding wimmens in here somewhere, but I will leave that to someone else.
Jay from GC 530 677 8600Leave a comment:

Leave a comment: