17" track wheel options ??

[j0oftheworld]

I'm currently running 15x7 TRM's w. 205 and 225 toyo's but have an opportunity to get 10 free 205/40-17 RA1's from my local director.
Wondering if there's a 17x8 wheel out there w. E30 offsets that's cheap enough to grab to use these tires?
My eventual plan was to run a 17x9 setup w. flares so I'm still not really accomplishing anything other than getting free tires and have better transitional wheel/tire combo.
Anyone have any 17x8 suggestions for track that would help to make this cost affective?

thx :)

[sarcasmkillsme]

http://r3vlimited.com/board/showthread.php?t=164485&highlight=arc-8

[Blip Bavarian]

I have a set of arc-8's that I may be selling soon...

[Fusion]

Sell/trade?
You should theoretically get more of the 15".

[j0oftheworld]

I was hoping there was something out there around $500.. not $1k. :)

[JRKOUPE]

I was hoping there was something out there around $500.. not $1k. :)

$500 for 4 x 17 inchers?.....looong shot.

[Eric]

For $500 I'd honestly look at running something with higher offsets and a Japanese bolt pattern. 5x112 is much easier to make adapters for than 5x120, and the JDM market is flush with 17 inch wheels with a 40-50 offset which would be perfect with adapters.

Not a perfect answer, but with that budget, I think it would be the best route.

If you want to bump up your budget, I'll buy 4 of those RA1's for $200!:D

[Bimmerman325i]

Or adapters for Subaru 5x100 wheels. Usual offset is 50ish.

[JJ1]

flares dont have anything to do with how wide your wheel is. Only matters what size tire you want to fit. you can spend $500 on wheels and $100+ on spacers or spend $1000 and just get the right wheel. arc-8s are nice. if they make 17x9 in a 4x100 you should get those. but i think they only have those in 5x120. good luck!