Easter Bunny Stops Here for Ice Cream

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Scott314
    replied
    Originally posted by rwh11385
    It was part of Beer opening tech.

    We were inside and therefore not at access to the door stops of our cars. So Dave said to use the door catch of the bathroom. I got sprayed.

    He offers to demostrate properly....and continues to do exactly what i did - get soaked.

    Then I do the same again. And this pic was the result.

    Twist off FTW. I stayed significantly drier.



    Heeter talking to the stewards after teaching Dave how to drift.




    Dave duking it out with a Merc.

    Leave a comment:


  • rwh11385
    replied
    Originally posted by hamann318is
    I approve of Heeter's beer choice. Looks like a stellar weekend, can't wait for the autox/track season.
    It was part of Beer opening tech.

    We were inside and therefore not at access to the door stops of our cars. So Dave said to use the door catch of the bathroom. I got sprayed.

    He offers to demostrate properly....and continues to do exactly what i did - get soaked.

    Then I do the same again. And this pic was the result.



    If i am going to drink beer and its not the bulk-purchased Keystone Light.... I'll have a XX or something similar. But I'm deep down a rum man and will always be. Sailor Jerry and Coke is tits.

    Leave a comment:


  • Sean
    replied
    Originally posted by DaveCN
    steel bar with holes in it under the battery tray, coupled with a generic battery tie down kit with rubber type top piece and long "J" bolts from autozone.
    Did the EXACT same thing. I'll...uhh...make a writeup sometime. I'm sure everyone here would love it.

    :p ;)

    Leave a comment:


  • Dave
    replied
    Originally posted by german g
    yea, i dont think itwould be to hard to make soemthing like that, hell, i might even weld soemthing lightweight up..
    Yeah - just make sure its immobile in the car. Heeter has screws running into the side of his battery to hold it in place!


    NEWS FLASH!

    THe Rat is back - I followed some kludge advice from alex and got the fuel pump to work - for now. I have another on the way still.

    Leave a comment:


  • german g
    replied
    Originally posted by DaveCN
    steel bar with holes in it under the battery tray, coupled with a generic battery tie down kit with rubber type top piece and long "J" bolts from autozone.
    yea, i dont think itwould be to hard to make soemthing like that, hell, i might even weld soemthing lightweight up..

    Leave a comment:


  • Dave
    replied
    Originally posted by german g
    cool, what do you use?
    steel bar with holes in it under the battery tray, coupled with a generic battery tie down kit with rubber type top piece and long "J" bolts from autozone.

    Leave a comment:


  • german g
    replied
    Originally posted by DaveCN
    Got your PM. And I have the battery tie down setup that is cheap and much more effective than the factory clamp.
    cool, what do you use?

    Leave a comment:


  • Dave
    replied
    Originally posted by german g
    cool, thanks guys. I do need a battery tiedown.. you have pm dave.

    I think there is gonna be some louisville derby bimmer meet sometime soon too...Most people concerned more with looks rather than GO, but still might be fun if people show up.
    Got your PM. And I have the battery tie down setup that is cheap and much more effective than the factory clamp.

    Leave a comment:


  • german g
    replied
    cool, thanks guys. I do need a battery tiedown.. you have pm dave.

    I think there is gonna be some louisville derby bimmer meet sometime soon too...Most people concerned more with looks rather than GO, but still might be fun if people show up.

    Leave a comment:


  • Dave
    replied
    Originally posted by Scott314
    On top of what Dave said...flush your brake fluid a couple weeks before going. Use something decent like Valvoline Synpower or ATE Super Blue. Make sure your battery has a secure tie-down that won't budge. New engine and tranny mounts aren't a bad idea, either.
    Battery tie down? I heard you can just wedge a block of wood in there . . .;)

    Late night WalMart parking lot tech FTW!!!!!

    Leave a comment:


  • Scott314
    replied
    Originally posted by german g
    Hopefully i can get my suspension put on next month...is passing tech, just safety stuff? I have m30afm, 19# inj.,& chip, does that matter? I'd really like to go.
    On top of what Dave said...flush your brake fluid a couple weeks before going. Use something decent like Valvoline Synpower or ATE Super Blue. Make sure your battery has a secure tie-down that won't budge vertically as well as horizontally. I'm not sure if one of those clamps that wedges against the side of the battery would pass or not. They're looking to make sure your battery won't fall out if you roll your car. New engine and tranny mounts aren't a bad idea, either.

    Leave a comment:


  • Dave
    replied
    Originally posted by german g
    Hopefully i can get my suspension put on next month...is passing tech, just safety stuff? I have m30afm, 19# inj.,& chip, does that matter? I'd really like to go.
    Passing tech is making sure the car is safe. Tires are good, brakes are new or nearly new, fluids aren't puking out. Battery has to be strapped down solidly, good wiper blades (ask me how I know). I don't think Buckeye requires you to get a mechanic to inspeect it beforehand, but its not a bad idea. Hoosier CCA required a mechnic's inspection.

    I think Don Black's shop in Louisville will do it for a reasonable fee - tell them you are a poor kid on a budget, and he might cut you a break.:D

    Pm me your email address, and I'lll send you the tech form from Hoosier - its pretty thorough - but most of it you'll have no trouble.

    Leave a comment:


  • german g
    replied
    Originally posted by DaveCN
    I'll fix that. Getting a rear headrest for next time. I'll see if I can get away with it on the front, but if not, I'll slap it on the back.

    Buckeye CCA has another one in July. If your car will pass tech - come. You need not have it modded out FUH RAZE style.
    Hopefully i can get my suspension put on next month...is passing tech, just safety stuff? I have m30afm, 19# inj.,& chip, does that matter? I'd really like to go.

    Leave a comment:


  • Sean
    replied
    Originally posted by DaveCN
    You're coming to Gingerman for the DE?

    Well, now that is intriguing . . . I hear its a lot like Putnam in that it is a nice wide open track with plenty of runoff if you goof.
    Hells ya I'll be there! Hoping for a fun day! :D Hell...a frickin fun week! It'll kickass!

    Should have my car there if everything works out! ;)

    Leave a comment:


  • Dave
    replied
    Originally posted by alex
    What happened to Heeter? Fuck, I missed it again...
    Hurt feelings on someone's part. The usual.

    He'll be back.

    He had a hell of a spin in the wet on Sunday!!!!

    Leave a comment:

Working...