Announcement

Collapse
No announcement yet.

Installed my Wink Rear view mirror today!(big pic)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    it's like 20" ish
    I was thinking I'd like it a little longer so I could see the left side more, but with my helmet on, it completly blocks the space between the roll bar hoop, and diag. I typically look out threw.

    edit...
    Here is the ebay link for the exact one I purchased
    http://cgi.ebay.com/ws/eBayISAPI.dll...category=29520

    The hardware for it was pure crap, and I had to make new side mounts as the ones included were too short for where I was wanting to mount it.
    85 325e 2.7 ITB'd stroker

    Comment


      #17
      damn, that mirror is huge, lookslike one from a schoolbus

      Comment


        #18
        Originally posted by Vedubin01 View Post
        Whats up with the super AFC and the rich/lean meter? Whats under the hood?
        +1
        sigpic

        Comment


          #19
          Originally posted by rs4pro3 View Post
          The super AFC and the rich/lean meter are for a MAF setup that will be getting installed realy soon(have all the parts, but no time to install and tune). The engine is a budget minded 2.7i
          85 325e 2.7 ITB'd stroker

          Comment


            #20
            Broadway convex mirrors do a damn good job while retaining stock appearance.

            270mm convex with black outlining, then use adhesive remover and a fingernail to get rid of the sticker in the corner, you're set.
            Reminiscing...

            Comment


              #21
              I found a picture online taken looking into a convex mirror, and the distances were all screwed up. Appearence didn't matter much to me, as my car basically is a barely street legal track car as it is.
              85 325e 2.7 ITB'd stroker

              Comment


                #22
                Originally posted by rs4pro3 View Post
                I found a picture online taken looking into a convex mirror, and the distances were all screwed up. Appearence didn't matter much to me, as my car basically is a barely street legal track car as it is.
                Fair enough!
                Reminiscing...

                Comment


                  #23
                  That thing would rule on track days. Good luck on the MAF install!
                  Summer '85 E24 635csi Winter '88 E30 325iX, I lose 25% of my hp before I even turn the key.

                  Comment


                    #24
                    Ya well I'm going to wait till after I go to Roadatlanta in 2 weeks to do the MAF. My fuel pressure regulator is pure crap, and I've got the apexi almost at it's max limits right now just to make the stroker not run so rich. So I got to bump the pressure down some.(guage says it's 70 psi, and won't change it no matter how much I adjust the regulator, I can raise the pressure but not drop it)
                    85 325e 2.7 ITB'd stroker

                    Comment


                      #25
                      This thing would be awesome for the beltway but........

                      I can see people going: :crazy:

                      It's such a great idea, just not very common.

                      Comment


                        #26
                        surprisingly advance auto has a convex mirror that works great. it clips over your existing mirror and works awesome. i agree, seeing blindspots and everything behind you is great. not to mention the one at advance is only like $6.
                        173rd ABN

                        Comment

                        Working...
                        X