E30 in SCCA

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • gearheadE30
    replied
    Originally posted by z31maniac
    Because with a few exceptions any car can be in that class with the same mods and most of those cars would eat an E30 alive at anything above a regional level.

    Let's take another DS car for example, ITR.

    Do you really think an E30 would stand a chance against Integra Type-R that are both prepped to the level of the rules? Or a WRX?
    That is definitely true, but I am under the assumption that DSP is the same way. Maybe not to the same level, but the e30 certainly isn't the most competitive car in DSP, at least to my knowledge.

    BTW I have never had an issue keeping up with other cars in my class, at least in my region. There is one ITR, as well as a few WRXs, an R32, and a modded CTS who I can regularly contend with. Granted, there is a possibility (well, probability) that the drivers of these cars could use some more practice.

    Leave a comment:


  • StereoInstaller1
    replied
    Originally posted by rwh11385
    DSP74's approach is like having a suit altered to your specs before you even try it on...
    Someonehas very obviously never made use of a tailors' skills.

    Bobby, go buy a suit from somewhere other than Mens Warehouse.

    Leave a comment:


  • rwh11385
    replied
    Originally posted by kishg
    i disagree.. even in engineering don't you build trial models, pilots? certainly in software engineering the new methodologies are to start simple and refactor/add functionality iteratively. I think a similar approach bodes well in driving. No amount of drawing board work will account for plunking your butt down and driving. That's not to say there is no value to research or data analysis, but it has to be in context of the experiential data learned by the driver. This is why pro teams have test drivers after all.
    kinda scary that's his stance. what if that is the method for his bars? design and no testing afterwards.

    actually, he has tested cheesy competitors but I've seen no mention of doing the same tests of "his" bars with the same procedure.

    Leave a comment:


  • DCColegrove
    replied
    Originally posted by kishg
    i disagree.. even in engineering don't you build trial models, pilots? certainly in software engineering the new methodologies are to start simple and refactor/add functionality iteratively. I think a similar approach bodes well in driving. No amount of drawing board work will account for plunking your butt down and driving. That's not to say there is no value to research or data analysis, but it has to be in context of the experiential data learned by the driver. This is why pro teams have test drivers after all.
    I'll grant you all of that...I was trying to make a point...;)

    (I don't know why bother though)

    Leave a comment:


  • kishg
    replied
    Originally posted by DCColegrove
    That's kind of the whole approach of engineering isn't though?

    Looks more like what he's done is some extensive research and once the resources come together for him, he'll have a well thought out and planned kick ass car.

    But really... Where do you get off capping on people?
    i disagree.. even in engineering don't you build trial models, pilots? certainly in software engineering the new methodologies are to start simple and refactor/add functionality iteratively. I think a similar approach bodes well in driving. No amount of drawing board work will account for plunking your butt down and driving. That's not to say there is no value to research or data analysis, but it has to be in context of the experiential data learned by the driver. This is why pro teams have test drivers after all.

    Leave a comment:


  • DCColegrove
    replied
    Originally posted by rwh11385
    DSP74's approach is like having a suit altered to your specs before you even try it on...
    That's kind of the whole approach of engineering isn't though?

    Looks more like what he's done is some extensive research and once the resources come together for him, he'll have a well thought out and planned kick ass car.

    But really... Where do you get off capping on people?

    Leave a comment:


  • rwh11385
    replied
    Originally posted by kishg
    phew.. im almost tired reading that.. you've certainly done exhaustive research and i applaud you for it. but heeter has a point, nothing beats seat time. could you not have been driving the stock car all this time while you researched the perfect DSP e30?
    DSP74's approach is like having a suit altered to your specs before you even try it on...

    Leave a comment:


  • z31maniac
    replied
    Originally posted by madformx5
    I bet an M50 or S50 would drive you to the mod class I am guessing. Anyone autox one of these?
    Yup, street mod.

    Leave a comment:


  • Jean
    replied
    Originally posted by madformx5
    I bet an M50 or S50 would drive you to the mod class I am guessing. Anyone autox one of these?
    I will next season, drove the piss out of my m10 all of last year and half of this year..time to upgrade to m52 and dot-r tires ;)

    Leave a comment:


  • kishg
    replied
    Originally posted by DSP74
    I'll answer this question. Not much real testing. I'll admit. And anyone around here knows that. Following any of the threads I've started makes that obvious.
    I do however have a grip on the basics of which some people are just to willing to ignore, and/or aren't aware of.
    Common sense says that a car that transfers enough weight to pick inside front AND rear tires is WRONG. Either from transferring to much weight, or simply not applying basic common sense to setup issues. I've had this issue argued with me by someone who posted a picture of the "perfect 4wheel steering M3" () of theirs ON TWO WHEELS!

    My research is based on 5 years of building and driving a full blow S/P car. One that received many iterations of systems, from suspension upgrades/setup changes to tire size/wheel size, gearing changes etc. Including compete suspension tear downs for TINY changes. For instance a tear down for an event to remove a 1/8 plastic bump stop spacer to increase wheel travel.

    From about 01 until now I've owned, read, and resorted back to several suspension tuning, design and implementation. While not for the E30 I've viewed actual Koni/Bilstein/Penske shock dyno plots, Data aquisition plots, engine dyno graphs, Roll center locater/plotter software, and VERY OFTEN OVERLOOKED YET VERY IMPORTANT, pictures and videos. Of various cars as it applies to autocrossing.

    I have been following BMW's since seeing Alex's car at various autoxes back in 02'. Since then I toyed with the idea of an E30 even before the sale of the Camaro. I've watched the BSP progression, into a competitive BSP car (before the rally cars) with great interest to the concepts involved in getting that car to the development stage it is/was at. I also had increased interest when a friend/shop owner purchased an E36 M3 that was initially intended as a SM car.

    Since purchasing the E30-originally purchased with the intent of autoxing in it, My research has been exhuastive. I no longer desire to, nor have the means to go through several iterations of a setup to get it right. I prefer to do so the first try.
    E30 research has included reference to Alex Schipkov, Garret Forkenbrock (E30Racer) and rsafier, and Kevin Henry's (hoyabmw) cars, along with conversations, and/or emails to 5 time national champ Sam Strano of stranoparts.com, bagillion time solo champ Bob Tunnel of Bimmerhaus, various bits of information from SEVERAL credible sources including BMW specific shop owner/tuners, as well as SEVERAL BMW competitors from BS, DS, ASP, BSP, DSP, FP, XP, and EM. Data points from phone conversations, e-mail conversations, forum conversations, second hand info from people who have inspected others car, to pictures of various events, surfaces, setups, etc, as well as videos with the same criteria.

    I've been to almost every site, talked to almost every credible person involved, and along with all the data points, combined with basic knowledge of suspension setup drawn conclusions on my setup, as well as any other info I have to offer.

    Thank you for reading-if you have read that far.
    phew.. im almost tired reading that.. you've certainly done exhaustive research and i applaud you for it. but heeter has a point, nothing beats seat time. could you not have been driving the stock car all this time while you researched the perfect DSP e30?

    Leave a comment:


  • madformx5
    replied
    I bet an M50 or S50 would drive you to the mod class I am guessing. Anyone autox one of these?

    Leave a comment:


  • madformx5
    replied
    Ok guys this is my thread and I want you stop raging on each other. Thanks for the info.

    Leave a comment:


  • z31maniac
    replied
    Originally posted by gearheadE30
    Sounds like a good detup DSP. Most of that you can do in STX; why not race in that class?
    Because with a few exceptions any car can be in that class with the same mods and most of those cars would eat an E30 alive at anything above a regional level.

    Let's take another DS car for example, ITR.

    Do you really think an E30 would stand a chance against Integra Type-R that are both prepped to the level of the rules? Or a WRX?

    Leave a comment:


  • DCColegrove
    replied
    #14,114

    Originally posted by rwh11385
    I don't get it, besides you being worthless like always. I swear, if you weren't trying to sell something or post about your stressful personal life, you wouldn't post at all.
    Just keep capping on people... If that's what makes you feel good.

    Leave a comment:


  • rwh11385
    replied
    I don't get it, besides you being worthless like always. I swear, if you weren't trying to sell something or post about your stressful personal life, you wouldn't post at all.

    Leave a comment:

Working...