E30 in SCCA

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • gearheadE30
    replied
    BMW did indeed make "crash correcting" bushings for both the rtabs and the front upper strut mounts. I've only ever seen the front ones for sale, though, and they are like 3x the cost of normal mounts.

    To the OP, I'm actually running in STX right now. If your car has a factory LSD, then it will jump directly from the stock class to STX if you add any class-changing mods to it. At least, that is the jump I made.

    Leave a comment:


  • z31maniac
    replied
    Originally posted by DSP74
    In stock form you can adjust the toe in the front. That's about it.

    FWIW a set of camber plates will add the adjustment you are after. And they are legal in everything above the stock classes.
    I thought you could use BMW specified parts, and BMW has specific adjustable RTAB's for E30's in the manuals. So they are legal. Correct?

    I had have to peruse the rules, but I thought that's what I remembered.

    Leave a comment:


  • JGood
    replied
    Originally posted by DSP74
    In stock form you can adjust the toe in the front. That's about it.

    FWIW a set of camber plates will add the adjustment you are after. And they are legal in everything above the stock classes.
    Yep. You can usually get -3.5 or so max negative camber with stock style springs. If you want more then that, you'll need smaller diameter springs (like coil-overs, 2.5")

    Leave a comment:


  • JGood
    replied
    Originally posted by madformx5
    I was curious what classes e30's run in for SCCA solo II? I was reading in my Bently manual that these cars do not have camber adjustment without buying something that I cannot remember what the name of it is right now and when you buy it you can only get 1/2 degree of negative camber at the most. Thanks!
    See Appendix A:

    http://www.scca.org/documents/Solo%2...lo_Rules_2.pdf

    It depends on the specific model.

    Leave a comment:


  • madformx5
    started a topic E30 in SCCA

    E30 in SCCA

    I was curious what classes e30's run in for SCCA solo II? I was reading in my Bently manual that these cars do not have camber adjustment without buying something that I cannot remember what the name of it is right now and when you buy it you can only get 1/2 degree of negative camber at the most. Thanks!
Working...