E30 in SCCA

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • DCColegrove
    replied
    #14,113

    Originally posted by rwh11385
    that they major in psycoooology?

    What are you doing in this thread? trying to push more bars? you are completely clueless about e30 classing and too lazy to even look at it, so see yourself out of it.

    Dsp is a good catch all for e30s, but d stock is absolutely fine to start in and learn and have fun. Maybe if more people took notice that alex s. Spent years in a near stock e30 cone dodging rather than years making thread after thread of suspension setup, more people would be driving like him rather than trying to play catch up with just the car setup down. Driving styles are different and different setups work for different people.

    Rather than dsp74 worrying about what other people tell him to do with an e30 or trying to measure everything out without having much seat time in an e30, he could be getting it together and feeling it out for himself. That would give him a much better starting place than staring at a car in the garage and asking if people can weigh four point harnesses.

    But hey, it is a lot easily to bench race and seek out mods than just bit the bullet and do it.

    Leave a comment:


  • rwh11385
    replied
    Originally posted by DCColegrove
    Just can't shut up can you?

    You know what they say about people that have to point out everyone else's flaws don't you?
    That they major in psycoooology?

    What are you doing in this thread? Trying to push more bars? You are completely clueless about E30 classing and too lazy to even look at it, so see yourself out of it.

    DSP is a good catch all for E30s, but D Stock is absolutely fine to start in and learn and have fun. Maybe if more people took notice that Alex S. spent years in a near stock E30 cone dodging rather than years making thread after thread of suspension setup, more people would be driving like him rather than trying to play catch up with just the car setup down. Driving styles are different and different setups work for different people.

    Rather than DSP74 worrying about what other people tell him to do with an E30 or trying to measure everything out without having much seat time in an E30, he could be getting it together and feeling it out for himself. That would give him a much better starting place than staring at a car in the garage and asking if people can weigh four point harnesses.

    But hey, it is a lot easily to bench race and seek out mods than just bit the bullet and do it.

    Leave a comment:


  • DCColegrove
    replied
    Originally posted by rwh11385
    Well, maybe stock class is for people who like to drive their cars rather than watch it sit on jackstands saving up for mods and spending months having blow struts rebuilt and measuring springs.
    Just can't shut up can you?

    You know what they say about people that have to point out everyone else's flaws don't you?

    Leave a comment:


  • rwh11385
    replied
    Originally posted by DSP74
    There is no mention of bushings in there though.

    FWIW I remember seeing something in the factory manual. Whatever that is, is the ONLY allowed mods in stock...

    Regardless who cares. Running in stock is for people who don't like to do anything to the car. That's probably not the case here.
    Well, maybe stock class is for people who like to drive their cars rather than watch it sit on jackstands saving up for mods and spending months having blow struts rebuilt and measuring springs.

    Leave a comment:


  • DCColegrove
    replied
    Originally posted by Danny
    Spec E30 runs with Nasa.

    Here ya go:

    http://www.spece30.com/
    Thanks all useful...

    I was wondering if there is one consolidated list of classes someplace?

    ( I'm kind of lazy)

    .

    Leave a comment:


  • Danny
    replied
    Spec E30 runs with Nasa.

    Here ya go:

    Leave a comment:


  • DCColegrove
    replied
    Originally posted by Danny
    BMWCCA.com?

    SCCA.com?

    Who do you wanna race with?
    Not me... I stopped as a driver in about '88 or '89.

    Who sanctions spec e30?

    Leave a comment:


  • Danny
    replied
    BMWCCA.com?

    SCCA.com?

    Who do you wanna race with?

    Leave a comment:


  • DCColegrove
    replied
    Off the topic a bit here...

    Is there anyplace I can go to catch up on all the popular (new to me) e30 racing classes and their respective rules?

    I left off quite a while ago and it seems that an amazing amount classes are targeted at less costly race cars has popped up since.

    Leave a comment:


  • Danny
    replied
    I run STU cuz I'm craaaaaaaaaaaaaazzzzzzzzzzzy

    Leave a comment:


  • DSP74
    replied
    I'm kind of kicking myself for not keeping that in mind.

    FWIW all the de-optioning I did=manual windows, sound system delete, trunk tar, OBC delete etc is only legal in Street Prepared. Also cars delivered with A/C will have to have it in S/T classes next year. And that stuff while not flashy was a little on the expensive side, as well as being quite a bit of work.

    FWIW I really want R-compound's as the fun factor goes WAY up.

    Leave a comment:


  • gearheadE30
    replied
    Sounds like a good setup DSP. Most of that you can do in STX; why not race in that class?
    Last edited by gearheadE30; 11-30-2008, 12:20 PM.

    Leave a comment:


  • DCColegrove
    replied
    OE Offset ball joints were available for e30s as well as correction plates...

    Not that it addresses any of this.

    Leave a comment:


  • madformx5
    replied
    This is interested information guys. Thanks. If anyone has anymore info I would be interested in reading it.


    88 325is. DSP autox car. DSP74 I would be interested to hear more about your car.

    Leave a comment:


  • z31maniac
    replied
    ^There are still some mods you can do and remain in D Stock, you don't just automatically jump to the street tire class. But an E30 isn't going to be competitive in D Stock.

    I don't believe you have to use the BMW bolts, but since BMW specifies the use of them in the service manual, they are legal.

    *going to read rulebook*

    13.8 E

    If authorized by the manufacturer, the use of shims, special bolts,
    removal of material to enlarge mounting holes, and similar
    methods are allowed and the resulting alignment settings are
    permitted even if outside the normal specification or range of
    specifications recommended by the manufacturer. If enlarging
    mounting holes is specifically authorized but no material removal
    limits are specified, material removal is restricted to the
    amount necessary to achieve the maximum factory alignment
    specification.


    That doesn't indicate to me it has to be the stock stuff, AKD adj delrin RTABs.

    Leave a comment:

Working...