Sponsors???

[da3bous]

Are you guys looking for forum sponsors or will you allow commercial listings. I own www.vollgasmotorwerks.com we are located in oregon and will be coming out with some crazy e30 products here soon and will try to beat any price out there for most things. We also do some service at a killer rate now. We were associated with another shop in beaverton but have ventured on our own. We also have a 2 wheel dyno!!!.

[MR 325]

Please refer to this thread for information...

http://www.r3vlimited.com/board/showthread.php?t=58497

Thanks
Matt

[da3bous]

Ohhh I jsut sent a PM to Eurospeed his Sn also had site owner under it. Do you want me to CC it to you?

[MR 325]

Ohhh I jsut sent a PM to Eurospeed his Sn also had site owner under it. Do you want me to CC it to you?

Sure, that would be great. I handle the banner stuff for the most part.

[M42Technik]

What kind of products will we be seeing? I'd love to know.

[da3bous]

We are about to finish up turbo manifolds for the M10/M42 and M20 motors. We will be doing full turbo kits that will be very fairly priced. Also we are doing shorty headers for each motor that will mate up to stock exhaust placement. We also have a close relationship with Unichip so we are going to use their brand new chips and see if they are more compatible with the BMW's. We are also doing some E36 and E46 stuff and possible some E39 for the BMW's but we are also doing some VW turbo kits and possible porsche stuff as far as in house products. We also sell stroker kits and so on. But i am looking to cater alot more to the E30 guys since you guys always get neglected!!!! But our shop/project cars as far as e30/e21 goes are a 325i turbo; 3.2L M20 E30; and a S14/M10 hybrid powered widebody 320i race car and finally an E46 M3cic. Most these cars are still being built but the turbo car is done and rocking but we are planning on doing a built motor here soon.

[wycoco]

keep us posted

[Karlspackler]

We are about to finish up turbo manifolds for the M10/M42 and M20 motors. We will be doing full turbo kits that will be very fairly priced. Also we are doing shorty headers for each motor that will mate up to stock exhaust placement. We also have a close relationship with Unichip so we are going to use their brand new chips and see if they are more compatible with the BMW's. We are also doing some E36 and E46 stuff and possible some E39 for the BMW's but we are also doing some VW turbo kits and possible porsche stuff as far as in house products. We also sell stroker kits and so on. But i am looking to cater alot more to the E30 guys since you guys always get neglected!!!! But our shop/project cars as far as e30/e21 goes are a 325i turbo; 3.2L M20 E30; and a S14/M10 hybrid powered widebody 320i race car and finally an E46 M3cic. Most these cars are still being built but the turbo car is done and rocking but we are planning on doing a built motor here soon.

What kind of stuff for the e36?