Dockweiler 12/18/10 (3 Year Anniversary)
Collapse
X
-
i've been working to make it happen, you yourself should know it takes some work ;)
but seems to be coming together, I think ill do better than pics and show up with
a couple of cars. I might bring a couple of 36s though /:sigpicComment
-
Comment
-
Hey Terry, if you're willing to drive out pretty early, let me know if you want
to roll with a group, I'm setting up a meet spot off the garfield exit on the 10
in Alhambra, plan to roll out of there at 2pm. Just sounds to me like its in your
way of travel anyway, so why not? :)sigpicComment
-
Update: We (Castros) are donating a semi-complete MAF kit for the raffle.
By semi complete, we mean you have to pay $50 for the new K&N Filter needed for the kit. Or you can buy a comparable Pepboys/Autozone/Kragen filter. :p
That means you get the following:
1 used, but confirmed working 3" OBD1 M50 HFM
1 MAF kit chip
1 silicone coupler
1 aluminum intake pipe, needed to connect the silicone coupler and stock intake elbow together
All necessary hose clamps
*** YOU MUST SCHEDULE AN APPOINTMENT WITH THE SHOP TO RECEIVE THE KIT, AND WE MUST INSTALL IT OURSELVES***
This is usually a $250 kit without filter. It's the BEST mod you can to to an M20 other then a turbo, supercharger or stroker. This kit provides instant throttle response and a very noticeable gain in power throughout the powerband. :nice:Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
:up:Update: We (Castros) are donating a semi-complete MAF kit for the raffle.
By semi complete, we mean you have to pay $50 for the new K&N Filter needed for the kit. Or you can buy a comparable Pepboys/Autozone/Kragen filter. :p
That means you get the following:
1 used, but confirmed working 3" OBD1 M50 HFM
1 MAF kit chip
1 silicone coupler
1 aluminum intake pipe, needed to connect the silicone coupler and stock intake elbow together
All necessary hose clamps
*** YOU MUST SCHEDULE AN APPOINTMENT WITH THE SHOP TO RECEIVE THE KIT, AND WE MUST INSTALL IT OURSELVES***
This is usually a $250 kit without filter. It's the BEST mod you can to to an M20 other then a turbo, supercharger or stroker. This kit provides instant throttle response and a very noticeable gain in power throughout the powerband. :nice:
Fuckin niiiiiiiceComment
-
Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Well there you have it guys, Castros Customs coming in with a curve ball to top it all off.
I don't think your run of the mill meet, can get you prizes like these: 1 maf kit installed, 1 set of rear and front (IE) swaybars, 1 powder coated valve cover, 1 set of cross hairs (4pcs), a fender rollin sessionr, 1 silicone custom boot, a rebuilt with Alpina tach and brushed aluminun rings cluster, 1 full set of pedals, 1 maf sensor, energy drinks and discounts for sets of brake rotors & pads, as well as different mods for all types of cars. ;)
Don't miss out......@IRON-E30 aka Edwin:DComment
-
Hopefully the weather doesn't rain on our party...........LITERALLY! :hitler:Well there you have it guys, Castros Customs coming in with a curve ball to top it all off.
I don't think your run of the mill meet, can get you prizes like these: 1 maf kit installed, 1 set of rear and front (IE) swaybars, 1 powder coated valve cover, 1 set of cross hairs (4pcs), a fender rollin sessionr, 1 silicone custom boot, a rebuilt with Alpina tach and brushed aluminun rings cluster, 1 full set of pedals, 1 maf sensor, energy drinks and discounts for sets of brake rotors & pads, as well as different mods for all types of cars. ;)
Don't miss out......Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Comment
-
Comment
-
So my fan clutch took a dump. Does not spin at all anymore. Guess i'll have to put on one of the 3 spares i have. I was literally saving them for a rainy day :rofl: Anyone have a spall thin mount? I'd rather just run a pusher fan and nothing else.
Done with school yet?Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
www.gecoils.com
My euro 316 project Transaction FeedbackComment





Comment