Like the title states I need a stock rear sway and a rear windshield for my IX. The IX uses just a basic rear E30 sway so anything will do. I will pay $100 for both of these. I have a 3.73 LSD and 2.79LSD I could do a partial trade with. I don't have a lot of free time to drive very far for anything so NoVA local stuff would be preferred.
-
-
Found a rear windshield for $20. Nice local guy too. Thanks mike!
Still need a swaybar. -
I believe I have a sway bar still sitting on my shell outside. But im in PA :(Originally posted by dirty30 View Post
Comment
-
I have a rear sway bar and I'm Bethesda, MD. Probably not worth the hike, but let me know.
BrodyComment
-
I have a sway bar as well. Let me know.sigpic
1989 Alpine 325is 2dr m50 swapped
Build Thread:
Current ongoing build. Check it out!
1991 318is 4dr rallycross
Rallycross Build Thread.
1991 Alpine 318is coupe - soldComment
-
I thought that the iX sway- while interchangable- was slightly larger than the stock e30 rear sway. Or maybe I have that backwards and the 'vert sway is larger in the rear and the iX is larger in the front...Comment
-
Patrick is right, the OEM iX rear bar is 14.5mm (as is the M3) while the standard E30 bar is 12mm.Comment
-
Thanks everyone. I'm picking one up this weekend from a buddy of mine. Everything I looked at listed a 14.5 for nearly every model. Anything would do at this point as mine rusted and snapped in half!Comment
Comment