I accidentally my water pump bolt
Collapse
X
-
I have never met a man who would put a ford motor in a chevy but have come across many who put a chevy motor into a ford......i wonder why that is?Leave a comment:
-
-
-
It's 100% unnecessary though... If you pull the motor you'll be pulling the turbo and intercooler anyway... Why not just pull those and work in the tighter area without having to diconnect and reconnect all those damn hoses, cooling system, bellhousing, etc...
Course, you could just man up and install the DP with everything in place ;)
Just need a socket extension that's about 2.5 feet long with a universal joint at the endLeave a comment:
-
If you pull the motor to do a stage 2 install, you deserve a swift kick in the nutsLeave a comment:
-
-
Psh, they're all easy enough to work on... Try doing a stage 2 install on a WRX or STI without pulling the turbo or OEM intercooler..Leave a comment:
-
there is oodles of room in my engine bay. but of course your M20 is built so you can't go back now!Leave a comment:
-
yup, got it out! (barely)
Fortunately the water pump itself is 7/16" thick, because I needed that stumpy 3/16" of remaining bolt to grab onto with the vice grips. (wasn't looking forward to drilling the block)
as for the m42, i'd be curious to work on/drive one, but i'm pretty happy with all the space i've freed up around my m20b30!
Leave a comment:
-
HAH! So did you get the snapped bolt out? I don't remember seeing that step in your account of events...
oh and you should have bought an M42 E30. They are easy to work on. unlike M20s.Leave a comment:
-
I'm going to go ahead and imagine the engine is glowing red hot in the first pictureLeave a comment:

Leave a comment: