Announcement

Collapse
No announcement yet.

FS: 95 M3 Track Car Project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS: 95 M3 Track Car Project

    95 M3 Clean Title
    Refreshed engine (New bearings ~15,000 miles ago), S52 head hardware
    New ARP2000 Head Studs
    New Elring Klinger Head Gasket
    Welded OPN
    6 Puck Unsprung Clutch (A few miles, still healthy, held my turbo power ~550ft/lbs just fine so will have no problem with any sort of GTS power you throw at it).
    New Radiator/recently new water pump
    New AST 4100
    New Vorshlag Camber Plates
    New Hyperco springs
    New Apex ARC-8 17x10 ET22
    New 255/40R17 Kumho Rcomps
    New front brakes (Brembo Blanks/Hawk Pads)
    Welded RTAB Pockets
    Powerflex RTAB's (A 15,000 miles on them).
    Lexan rear 3 windows
    Hard Motorsport Fender Flares
    3" SS304 Exhaust w/ Vibrant Muffler (Needs mated to midsection)
    Interior is gutted, with cut/gutted doors

    Still needs work to be a competitive GTS car, I have spent a lot of time on this car, but as of now, I never use it and it will be a while before it's finished. It just sits in my garage and I would rather move on to other things or sell outright to pay off E46 and put money away for out of country move.

    I was going to put in a cage and an FIA seat prior to sale, but at the same time, I feel as though there are many different cage designs and sized drivers for seats so it might be best as I do not do those so the purchaser can have it built to fit his liking. If you would like it caged, let me know and we can discuss something.

    Very motivated, cash talks, if you have something for trade/partial trade I would consider that as well. Asking $10,500 OBO (303) 518-2198, I'll take more pictures tonight.
    -Critter
    E36 M3 Turbo | E46 M3 6MT

    #2








    -Critter
    E36 M3 Turbo | E46 M3 6MT

    Comment


      #3
      nice set up. Love the look of the car GLWS
      95 7.1L 16V E36 M3
      Motorsport Hardware ***Wheel studs and Spacers!!!--->FOR SALE 4/5 Lug Stud Conversion Kits available CLICK HERE
      LIKE my Facebook Page! CLICK HERE

      Comment


        #4
        Bump! $9,000 OBO
        -Critter
        E36 M3 Turbo | E46 M3 6MT

        Comment


          #5
          what fender flares are those?
          89 325i (Sold)
          95 M3 (Track Car in Progress)
          2001 4runner (DD)

          Comment


            #6
            Originally posted by BMWchubbs View Post
            95 M3 Clean Title
            Refreshed engine (New bearings ~15,000 miles ago), S52 head hardware
            New ARP2000 Head Studs
            New Elring Klinger Head Gasket
            Welded OPN
            6 Puck Unsprung Clutch (A few miles, still healthy, held my turbo power ~550ft/lbs just fine so will have no problem with any sort of GTS power you throw at it).
            New Radiator/recently new water pump
            New AST 4100
            New Vorshlag Camber Plates
            New Hyperco springs
            New Apex ARC-8 17x10 ET22
            New 255/40R17 Kumho Rcomps
            New front brakes (Brembo Blanks/Hawk Pads)
            Welded RTAB Pockets
            Powerflex RTAB's (A 15,000 miles on them).
            Lexan rear 3 windows
            Hard Motorsport Fender Flares
            3" SS304 Exhaust w/ Vibrant Muffler (Needs mated to midsection)
            Interior is gutted, with cut/gutted doors

            Still needs work to be a competitive GTS car, I have spent a lot of time on this car, but as of now, I never use it and it will be a while before it's finished. It just sits in my garage and I would rather move on to other things or sell outright to pay off E46 and put money away for out of country move.

            I was going to put in a cage and an FIA seat prior to sale, but at the same time, I feel as though there are many different cage designs and sized drivers for seats so it might be best as I do not do those so the purchaser can have it built to fit his liking. If you would like it caged, let me know and we can discuss something.

            Very motivated, cash talks, if you have something for trade/partial trade I would consider that as well. Asking $10,500 OBO (303) 518-2198, I'll take more pictures tonight.

            Comment


              #7
              Originally posted by ltz Viper View Post
              -Critter
              E36 M3 Turbo | E46 M3 6MT

              Comment


                #8
                sure didn't
                89 325i (Sold)
                95 M3 (Track Car in Progress)
                2001 4runner (DD)

                Comment


                  #9
                  Bump!

                  Make me an offer, I want this gone asap. Also highly interested in partial trades 125cc Shifter Karts Honda powered is preferred
                  Last edited by BMWchubbs; 05-13-2013, 01:45 PM.
                  -Critter
                  E36 M3 Turbo | E46 M3 6MT

                  Comment


                    #10
                    I'll have my 125cc tony kart back this week.. wish you were closer! I always wanted an e36

                    Comment


                      #11
                      Bump $7,500 OBO
                      -Critter
                      E36 M3 Turbo | E46 M3 6MT

                      Comment


                        #12
                        price is dropping quick
                        1997 Audi A4 1.8t 5-Speed (bamboo metallic): ST Coilovers, Sport Edition 17x7.5 Et35, 215/45/17 Kumho AST, Panzer, Depo Ecodes, 55w 5k bulbs, Magnaflow 14815, Res delete, JHM Vent Boost gauge
                        2001.5 Audi s4 2.7tt 6-Speed (Imola Yellow)
                        <<Flickr>>

                        Comment


                          #13
                          Originally posted by 325i View Post
                          price is dropping quick
                          I want it gone lol
                          -Critter
                          E36 M3 Turbo | E46 M3 6MT

                          Comment


                            #14
                            Bump. $6,500 OBO
                            -Critter
                            E36 M3 Turbo | E46 M3 6MT

                            Comment

                            Working...
                            X