Parting out my e30
Complete Turnkey m50tu swap for 89 325is
-75k on m52 2.5 bottom end
-10k on rebuilt m50 head, vanos rebuilt with besain systems kit
-VAC e34 oil pan baffle
-Safety wired oil pump nut
-Ebay headers w/ new O2 sensor
-Getrag 260 trans unknown miles (has getrag rattle at idle)
-M20 flywheel machined down to 11 lbs
-5k on new SACHS clutch
-Garagistic trans swap brace w/ AKG reinforced mounts
-Cut and rotated shift linkage
-Subframe reinforced with IE parts
-AKG m50/e30 swap polyurethane mounts
-e36 reman steering rack w/new PS lines, outer tie rods
-M50 DME with e30 318is DME mounts
-New e34 throttle cable
-New 255lph fuel pump
-New waterpump and tstat
-E30 M3/318is firewall wire loom cover (makes for a clean firewall)
I build this swap with track duty in mind. With the reinforced subframe and the AKG engine mounts this thing is solid. The VAC oil pan baffle was added and oil pump nut was safety wired. The transmission is a little noisey but has never skipped a beat. I added a shrader valve to the tstat housing to aid in bleeding air from the cooling system.
Looking to get $1700 obo
Complete Turnkey m50tu swap for 89 325is
-75k on m52 2.5 bottom end
-10k on rebuilt m50 head, vanos rebuilt with besain systems kit
-VAC e34 oil pan baffle
-Safety wired oil pump nut
-Ebay headers w/ new O2 sensor
-Getrag 260 trans unknown miles (has getrag rattle at idle)
-M20 flywheel machined down to 11 lbs
-5k on new SACHS clutch
-Garagistic trans swap brace w/ AKG reinforced mounts
-Cut and rotated shift linkage
-Subframe reinforced with IE parts
-AKG m50/e30 swap polyurethane mounts
-e36 reman steering rack w/new PS lines, outer tie rods
-M50 DME with e30 318is DME mounts
-New e34 throttle cable
-New 255lph fuel pump
-New waterpump and tstat
-E30 M3/318is firewall wire loom cover (makes for a clean firewall)
I build this swap with track duty in mind. With the reinforced subframe and the AKG engine mounts this thing is solid. The VAC oil pan baffle was added and oil pump nut was safety wired. The transmission is a little noisey but has never skipped a beat. I added a shrader valve to the tstat housing to aid in bleeding air from the cooling system.
Looking to get $1700 obo
Comment