New England FS/FT/WTB thread

[e30onBBSs]

wtb alpine passenger fender and a z3 shifter or any e30 shifter full shifter linkage, mine is shit and definitely not from an e30.

[BonezE30]

WTB: just bought my first E30. 92/93 325 vert. Need a few random things. Cigarette lighter cause I hate staring at the empty hole. Tan floor mats for a 5 spd. And the power mirror switch on the drivers side door. Anyone have any of these parts used or know of a junk yard that may have them?

[Vanilla Gorilla]

WTB: just bought my first E30. 92/93 325 vert. Need a few random things. Cigarette lighter cause I hate staring at the empty hole. Tan floor mats for a 5 spd. And the power mirror switch on the drivers side door. Anyone have any of these parts used or know of a junk yard that may have them?

I've got a switch and cigarette lighter in Quincy, MA

[Das Delfin]

WTS stuff to install battery in the rear of a convertible

Got this stuff from a 1987 325is. Everything to put your battery in the trunk of a cabrio, including main battery cables, mounts up front, acid catch tray in the back, trunk cover, bolts, everything to make it work. I was going to do this but changed my mind.

I paid $60 so I will take $60.

[Car Addict]

WTB passenger front foglight for a late model e30

[jeff_b]

WTB passenger front foglight for a late model e30

I have a few in Uxbridge

[blatant]

1997 332ti for sale :)

[Das Delfin]

Also I have one of those wire cup holders that screws into the ash tray mounting bolts. $40

[ScHpAnKy]

WTB headlight\turn signal stalk, pls PM

[Das Delfin]

bringing this thread into SEPTEMBER also buy my stuff!

-wire cup holder $40
-literally everything to move a cabrio battery to the trunk $60
-check panel w/o airbag $10
-e brake shroud $10
-vert dome light $10
-sealed beam high beams $10
-old panasonic CD player radio w/harness $10

[jeff_b]

Labor Day Weekend Special!! Lots Of Stuff, Uxbridge Ma$$!

Still don't have the heart to scrap my old rusty friend.

Lots of parts available. Bring tools and buy some cheap stuff, or $350 for the whole car:


Good front plastic bumper, (rear is cracked), newer alternator, Racing Dynamics springs, cross drilled and slotted brakes with ceramic pads (<20K on them), strong American Racing aluminum 4X100 wheels that don't lose air (UPDATE, one is flat now), good LSD unsure of ratio, good dashboard, (couple starter cracks).

Also I have a ton of other parts: tan standard seat vinyl interior in excellent condition, good rear window w/defogger, 4 bottlecaps with snows (2 seasons left), window regulators, fuel pump, some cloudy Ellipsoids, solid sunroof panel, all the stuff under the hood that makes the M20 engine run, lots of interior bits and pieces, relays, fuses, switches from other cars, good M20 head.

[M-technik-3]

Came across this on 318ti.org

95 318ti Hellrot Clubsport DASC Supercharged 146k
$6,900
Located in Boston area

Chassis is very clean, originally from Florida.

Super Rare, less than 200 made. OEM M-technic body panels, color matched exterior mirrors, sport suspension, LSD, sunroof and leather interior. This model is equipped with Downing Atlanta Supercharger, (which sell used for 2k alone) and a few tasteful mods.

Bilstein PSS9 suspension
Supersprint exhaust
BMW X-Brace Reinforcement
HID headlights UUC
EVO3 Ultimate Short Shifter
Mom steering wheel
Black grill/clear signal lights
Blaupunkt radio with AUX Ipod adapter
GlowShift Digital Boost gauge
DS2 M3 wheels with spare (have an extra set of new summer tires if interested)
OEM wheels with like new snow tires included

Maintenance up to date, I have all records in a binder!
This includes water pump and clutch at around 80k.
(Last 25k miles)
Front Control Arms Bav Auto FCAB
328i Front Calipers
Throttle position sensor
Knock sensor Idle Control valve
Timing Chain tensioner

Recent Maintenance
Oil filter housing gasket/bushing
New Front Slotted rotors
New Stoptech Street Performance Pads
New OEM Bosch plug wires
New NGK plugs
New Valve Cover Gasket
New idler pulleys (all)
New belts (all)
New Motor mounts
New Hood latch cable
Changed Oil filter/Valvoline Synthetic Oil 5w30
Changed transmission fluid

Condition
Car is overall in great condition, Carfax also available. The only issues I would mention is that some clear coat is peeling on the side mirrors and a tiny amount on the rear bumper. There is a small amount of paint bubbling on the passenger rear fender, but no rot or rust. There is a very small oil drip sometimes when the car is parked, I was not able to find out where it is coming from, it is not significant enough to register on the dipstick but with the intent of transparency I am noting this.

Overall the car needs nothing and is extremely fun, reliable and useful. Paint is in very good condition with minor stone and rock chips etc. AC, heat, all lighting and electronics working. With the folding rear seats its amazing what you can fit into this thing. The car is quick and still gets 30 mpg on the highway. Please contact me if you have any questions! mcamadeco@gmail.com

http://www.318ti.org/forum/showpost.php?p=375703&postcount=1

[RedHoodRidah]

http://providence.craigslist.org/pts/5189553972.html

[SlapDash]

E30 BMW 325iX bits 1989 - $50

condition: good
make / manufacturer: BMW
model name / number: 325iX


iX bits, all for $50, must pick up today in Cranston, RI, by 6 pm, no holds.

- Two strut housings, with spindles/bearings/springs

- Several front and rear sway bars, one with recent end links

- Front transfer case housing

- Aftermarket AC compressor

Also 'i' intake and headers, for an additional $30

[Bbruins72]

Oh man where was this post 3 weeks ago as I searched for front strut houseings. GLWS. If it's all still available tomorrow I might be interested.

E30 BMW 325iX bits 1989 - $50

condition: good
make / manufacturer: BMW
model name / number: 325iX


iX bits, all for $50, must pick up today in Cranston, RI, by 6 pm, no holds.

- Two strut housings, with spindles/bearings/springs

- Several front and rear sway bars, one with recent end links

- Front transfer case housing

- Aftermarket AC compressor

Also 'i' intake and headers, for an additional $30