So I've gotten to the point in my swap where the harness needs to be plugged in; and I have no idea what the fuck is going on. I'd rather not read through the millions of pages on the 24v board. Can some one point me in the right direction. Or, come help me do it. I'll pay in beer and comedic releif. Car is located in tewksbury
-
-
Download the wiring manuals here - http://www.wedophones.com/BMWManualsLead.htm
Go through them and make your own harness. You can use the wiring diagrams in my sig as a guide, but make sure you check the diagrams for your engine and car before plugging anything in. Good luck! -
S50 wiring
is this a late or early car your going to be swapping? I have an 85 with an s50 installed I can point you in the right direction if you run into any issues but the basics have been laid out for you by many many posts on this subject and lots of info on the web, just start with the few wires you actually need to get it running then add in vss,check engine,tach signal etcComment
Comment