messed up 3.73lsd and springs trade for???

[e30:)]

DIFF SOLD!

i have a 3.73lsd that the passenger side output flange is off, not broken but most of the axle bolts are ground off so they will need to be extracted i can get some picture if you dont understand what im saying.. i also have some tokico and b&g springs and some weaves with shitty tires some curb rash and one is striped and partly polished.
im looking to trade for some 20mm spacers, stud kit, strait bottlecaps with good tires, whatever else you may have... i will also sell the stuff too. im moving at the end of the month and i cant bring this stuff with me so im trying to trade for stuff i can use
let me know if you got anything.

also have a turner chip for an 87 325i

[Dirtsquirt]

What were you looking at getting out of the LSD?

[e30:)]

since it needs work il say 125

[ck_taft325is]

Tokico and B&G springs... is this a drop setup or?

[e30:)]

no, i have a set of tokico springs and a set of b&g springs, sorry for the confusion

[dashboardmonkey]

from your description it sounds like all you need to do to the diff is replace an out put flange, very easy really
source an output flange=profit

[619E30]

How low do the b&g springs drop the car?

[e30:)]

from your description it sounds like all you need to do to the diff is replace an out put flange, very easy really
source an output flange=profit

this is true, i dont have the time to do it but for someone who has time they could prob make 100 off it

How low do the b&g springs drop the car?

here is a picture of the car they came off, please excuse what the po did to the car i was trying to pry the body kit off ha

[LivingLegend06]

Its just the output flange thats messed up, not anything else? If I remember right it just slides out and a new one can be slid in easily, right?

Dammit I wish you were closer. Are you going to be in the Portland area anytime soon?

Edit, I have two sets of bottlecaps, I think both sets have about 50% tread left, I'd be willing to trade a set for the diff.

[e30:)]

correct, its just the output flange other then that its all good. although i dont have any plans on coming down there...
do you have pictures of the tread?

[StereoInstaller1]

How low do the b&g springs drop the car?

I wonder if B&G make different drops? Mine is on B&G, it is way lower than that.

[Danny]

I have some straight bcaps with good tires I'll sell to you for 150.

[e30:)]

i dont have any money, im just trying to sell/ trade this stuff. thanks though

[e30:)]

I wonder if B&G make different drops? Mine is on B&G, it is way lower than that.

15 034 is the part number for the front, i didnt check the back yet.
i know nothing about this brand, they just came on a car a bought a while back.

[LivingLegend06]

correct, its just the output flange other then that its all good. although i dont have any plans on coming down there...
do you have pictures of the tread?

Sorry, I don't have any pictures of the tread. They are not great tires but they have some life in them and work if you just need something to roll around on. They could probably use a re-balance too since I was getting some vibrations around 80mph. When I swapped to a different set of wheels and tires the vibrations disappeared.

I can get pictures but It would probably be about 2 weeks, they are located in Portland and I'm in Corvallis for school right now.

I don't know when I'll have time, but if I have a weekend in the next few weeks would you be willing to meet me halfway between Portland and Seattle? I could probably even throw some cash or other parts on top of the Bottlecaps for the diff because I don't think they are really worth that much.

Does anyone know if medium case and small case diffs use the same output shafts?