No longer too interested in elaborate car audio setups so I'm selling all of my stuff to go for a more simpler setup in the wifey's car.
So here's what I have -
3 x Sansui SM1500 2-channel amplifers - $275 (for all 3)
1 x AudioControl EQL (older model with the large knobs) - SOLD
1 x AudioControl 2XS crossover (never used) - SOLD
1 x Image Dynamics IDQ12v2 Dual 2-ohm - SOLD
1 x USA Spec PA10-VW iPod/aux input adapter for VW (does not charge USB only models) - SOLD
I'm in the Graham area but willing to meet in Tacoma or Southcenter areas. PM/IM or call/text - 360-306-5448 if you're interested.
The Sansui's are based on PPI AM2075 models from the early 90s. Two of the amps have been reconditioned by ZedAudio. One hasn't but I tested and it still worked. I only have two pigtail connectors for the amps, you can either hunt eBay or I can get you in touch with someone off DIYMA that has a spare or two that is willing to sell. You can also just solder in a normal speaker/remote amp connector as well.
These are great amps. I was hoping to install it in an old school car, but sold the car so would prefer to see it go into an era specific car.
The specs are -
Output Power at 12V:
2 x 75W @ 4 ohms (<0.05% THD),
2 x 150W @ 2 ohms,
1 x 300W @ 4 ohms bridged,
img]http://farm5.static.flickr.com/4010/4546469988_01bf4a709f_b.jpg[/img]
Image of the guts can be found here - http://www.carhifi-lounge.net/sansui...sm-1500-a.html
So here's what I have -
3 x Sansui SM1500 2-channel amplifers - $275 (for all 3)
1 x AudioControl EQL (older model with the large knobs) - SOLD
1 x AudioControl 2XS crossover (never used) - SOLD
1 x Image Dynamics IDQ12v2 Dual 2-ohm - SOLD
1 x USA Spec PA10-VW iPod/aux input adapter for VW (does not charge USB only models) - SOLD
I'm in the Graham area but willing to meet in Tacoma or Southcenter areas. PM/IM or call/text - 360-306-5448 if you're interested.
The Sansui's are based on PPI AM2075 models from the early 90s. Two of the amps have been reconditioned by ZedAudio. One hasn't but I tested and it still worked. I only have two pigtail connectors for the amps, you can either hunt eBay or I can get you in touch with someone off DIYMA that has a spare or two that is willing to sell. You can also just solder in a normal speaker/remote amp connector as well.
These are great amps. I was hoping to install it in an old school car, but sold the car so would prefer to see it go into an era specific car.
The specs are -
Output Power at 12V:
2 x 75W @ 4 ohms (<0.05% THD),
2 x 150W @ 2 ohms,
1 x 300W @ 4 ohms bridged,
img]http://farm5.static.flickr.com/4010/4546469988_01bf4a709f_b.jpg[/img]
Image of the guts can be found here - http://www.carhifi-lounge.net/sansui...sm-1500-a.html
Comment