M42 Pulling party...2/19/11...PDX

[Matt-B]

Yea, Josh got one for his m50. helped so much, no ruining your core support etc.

[AbeSonic]

And orange soda. :D
I hope all the snow clears in time for your swap.

[John T]

I have one I can bring if you don't wanna buy one

[bmwm42]

Blue moon

[Matt-B]

I have one I can bring if you don't wanna buy one

your the man john...

PMs sent with address...

[Knoepfler]

This^^^

Harbor freight has one for $25. Don't think you're getting that engine out without one.

wat

[AbeSonic]

I think it really was -22 degrees outside this morning! Where did all that snow come from?

[glucklich21]

wat

Well there's other methods, but if you're going through the top and not dropping it through the subframe, yeah you'll need one. Way too much stuff needs to be angled to get out. ;)

[Knoepfler]

hmm i didn't really have a problem without one, maybe i got lucky.

Well there's other methods, but if you're going through the top and not dropping it through the subframe, yeah you'll need one. Way too much stuff needs to be angled to get out. ;)

[Wishno87]

An M42 is tiny so pulling it wont be horrible without one but you really need one to put an M50 in. Otherwise you have to get really creative to angle it right like we had to do to JJE30s car.

[Knoepfler]

I guess im stopping by harbor freight on my way home then

[EN318isPDX]

I should be attending, im coming from tualatin so if anyone wants to ride with me they can.

[travis816]

Im most likely interested in joing, I also have alot of experience in swaps. Let me know if ya want me to join. where exactly are you located at?

[Matt-B]

Kalama WA. 30min north of PDX roughly....


note: the m50 is not going in the same day guys

[AbeSonic]

Im most likely interested in joing, I also have alot of experience in swaps. Let me know if ya want me to join. where exactly are you located at?

*going.
So when are you doing the actual M50 swap Matt? Or do I already know the answer...? >.>