Glass Removal

[brutus87]

Anyone in the PDX area know how to safely remove the front windshield/rear glass? I don't feel confident enough to do it on my own. The car is getting prepped for paint. Im willing to pay you in beers, food, or monies, pm or text/call me at 503-490-7233 thanks

[djjerme]

I don't have the suction cup's but I have a trim tool you could borrow.

[Wishno87]

Just pull the lock strips out, squish over the seal and it comes out pretty easy. Its not in there all that tight.

[LuckyHenriksen]

^ what he said, if it is factory sealed (no one used actual glue) they just pop right out. If it is glued in, prepare for a nightmare. Your dad said he knew all about getting them out

[ethirtydavid]

easiest if you have someone on inside applying light pressure as you fold back the rubber seal

be careful, take your time and you will get it out without issues.

[Wishno87]

easiest if you have someone on inside applying light pressure as you fold back the rubber seal

be careful, take your time and you will get it out without issues.

+1 came out much easier than expected.

[brutus87]

Thanks for the replies guys.
Is thr rear one the samr way? Its all factory original bmw glass.
If anyone is willing to lend me a hand tonight around 7id be extremely grateful anf willing to pay for your gas or food/ time.

[Wishno87]

Yup rear is the same. Just has those corner pieces that you have to be careful with when you remove so you don't damage them.

[Wishno87]

Also don't forget to unplug your rear defroster.

[brutus87]

Thanks for the help guys.

[djjerme]

I might try to remove my rear glass this fall to go to Lexan, might call of one of you for help then!