Hey everyone, my name is Kiefer, and i am fairly new to the site, at least posting. I'm usually lurking in the shadows gaining knowledge and trying to pick my way through things. I'm fairly new to BMW's, having only owned mine about 6 months. In that time I have replaced a lot of stuff, and generally what comes with buying a car from craigslist that some jackass tore up. After pulling the pan and getting the giant hole welding up, I gave it a nice fresh gasket, and put it all under protective custody with an EJnight skidplate.
I then went to changing out the cut stock springs for an Eibach Pro kit with Bilstein sports all the way around. While the front end was apart, i went ahead and replaced control arms, control arm bushings, and i had to replace one of the strut tubes as it was bent.
When i first bought the car, the CSB was trashed, but not knowing about BMW's, i went and got a new bearing for 40 bucks, and paid a shop 350 dollars to install. (facepalm) That hardly lasted 4 months before it went out again. This time i replaced the whole shaft with one from drive shaft service of Portland, and got a new guibo, learning from the mistakes i previously made.
That's just a quick rundown of who i am and a bit about the introduction into BMW's I've had, but something about 80's euro screams awesome to me, so I'm here to stay. This brings me to the reason I am finally posting, I am in real need of a 027 ECU, preferably with a chip, I am looking to buy ASAP and can pay pal right away. If you have anything please PM me here or text at 425 419 32 4 6
I then went to changing out the cut stock springs for an Eibach Pro kit with Bilstein sports all the way around. While the front end was apart, i went ahead and replaced control arms, control arm bushings, and i had to replace one of the strut tubes as it was bent.
When i first bought the car, the CSB was trashed, but not knowing about BMW's, i went and got a new bearing for 40 bucks, and paid a shop 350 dollars to install. (facepalm) That hardly lasted 4 months before it went out again. This time i replaced the whole shaft with one from drive shaft service of Portland, and got a new guibo, learning from the mistakes i previously made.
That's just a quick rundown of who i am and a bit about the introduction into BMW's I've had, but something about 80's euro screams awesome to me, so I'm here to stay. This brings me to the reason I am finally posting, I am in real need of a 027 ECU, preferably with a chip, I am looking to buy ASAP and can pay pal right away. If you have anything please PM me here or text at 425 419 32 4 6
Comment