Wtb:M20b25

[dahows]

Time to start a conversion on the euro car. I've gathered a few parts for the eventual stroker build but low compression in #2 cylinder of the m20b23 and worsening oil consumption says I need to do something in the interim.
So I'm looking for a m20b25 and parts for a motronic 1.3 conversion.

Let me know what you've got r3v.

[e30austin]

David, I have a B25 harness. Was used in an early car, so it already has the tach wire ran. Needs one connector resoldered. $40 picked up. Text me if you're interested, or need a hand with the swap!

[Den_k321]

your looking for the whole thing? i have fully m20b25 5sp from my 1988 325is that i swapped for an s50...

[nny403]

I have a fully rebuilt 0-Mile Engine ready for sale as well, comes with electronics, harness and resurfaced flywheel.

[dahows]

David, I have a B25 harness. Was used in an early car, so it already has the tach wire ran. Needs one connector resoldered. $40 picked up. Text me if you're interested, or need a hand with the swap!

Thanks Austin, I'll catch up with you on this and help is always appreciated. I'm not in a huge hurry as I have an e46 rescue underway at the moment. Some people should just buy a honda and call it good.

your looking for the whole thing? i have fully m20b25 5sp from my 1988 325is that i swapped for an s50...

Well, I didn't think I was I may be. My car came stock with a 260 but let's chat about what you have and what you're asking. I'll PM you.

[dahows]

I have a fully rebuilt 0-Mile Engine ready for sale as well, comes with electronics, harness and resurfaced flywheel.

That's probably a better motor than I need, I'm just looking for something to get me by for a year or two but I'll pm you for more details.

[nny403]

If you have a dead cyl let's talk yakking motor and rebuilding it maybe. Save what you've got.