need to use a drive way in seattle

[camip]

Hey guys came up to seattle to look for jobs this weekend and as soon as I get here I get a knock from my driveline. Popped my head under the car and guibo looks fine some bolts could use tightening there is fluid around the tranny always leaks a little. Just wanting to use someones drive way and possibly some jack stands to pull the guibo off and see if I can limp her home.

[5Toes]

Maybe center support bearing?

[camip]

Yeah I was thinking that but wouldn't it clunk at higher speeds same with the guibo I only get like 2-4 clunks at take off.

[42000]

sounds like csb to me

[camip]

Fuck I just put a new on in not 6 months ago.

[Keith M]

A bad driveline will wear out csb's.

[Sparkle']

I live in an apartment complex if you want to do it here. Got floor jack and jackstands. Lmk

[camip]

I live in an apartment complex if you want to do it here. Got floor jack and jackstands. Lmk

Might take you up on that offer. I think I'm just going to roll it home.

[5Toes]

#yolo?

[camip]

Pretty much why waste time pulling off heat shields to see the csb is wearing and have to drive it home anyway.

[42000]

your U joint might be bad, throwing the whole shaft into a weird rotation and putting extra force on the CSB. (weird angle)

[camip]

your U joint might be bad, throwing the whole shaft into a weird rotation and putting extra force on the CSB. (weird angle)

The drive shaft is new and built by a shop the previous owner bought it. I called the shop today and he said bring it down and he will see whats wrong. Problem is the shops a hour and a half away.

[42000]

ahh, well hopefully he can sort it out for you on the cheap

[camip]

Yeah if its to much I'm just gonna throw it in the car drive it and look for a new one. I thinking maybe I need to space the csb down?

[42000]

Did you preload it? you have to push the csb towards the front of the car and then tighten it.