Selling a lightened and balanced ETA single mass flywheel. I had the machine shop take it down to 15lbs a few years ago, and my eta car got rear ended before I could instal it :(.
It still has the magnetic key way for ETA's and I'm pretty sure this will work on i's also. Someone correct me if I'm wrong. I'm just trying to get my machining costs back on this one, so $130 obo.
Just for reference, I recently had an m10 flywheel taken from 14lbs to 11.5lbs and then balanced by Autosport in Seattle, and it cost $220 after tax.
LSD is 3.45 not 4.45, sorry for the typo. No pictures of the lsd yet. It came out of my 318ti when I upgraded to a medium case lsd for a 24v swap. Unknown miles, but seemed to lock up just fine. Has a faint whine when off throttle, I could only hear it when things were really quiet. $250 obo.
Located in Greenlake, contact by PM or at 5 zero 1 seven 72 nine 7 eight 4
It still has the magnetic key way for ETA's and I'm pretty sure this will work on i's also. Someone correct me if I'm wrong. I'm just trying to get my machining costs back on this one, so $130 obo.
Just for reference, I recently had an m10 flywheel taken from 14lbs to 11.5lbs and then balanced by Autosport in Seattle, and it cost $220 after tax.
LSD is 3.45 not 4.45, sorry for the typo. No pictures of the lsd yet. It came out of my 318ti when I upgraded to a medium case lsd for a 24v swap. Unknown miles, but seemed to lock up just fine. Has a faint whine when off throttle, I could only hear it when things were really quiet. $250 obo.
Located in Greenlake, contact by PM or at 5 zero 1 seven 72 nine 7 eight 4
Comment