5 Lug e30 Partout + S62/ 6 Speed Part Out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 318isbmw
    Moderator
    • Nov 2005
    • 2841

    #1

    5 Lug e30 Partout + S62/ 6 Speed Part Out

    Before I list this everywhere, here are the parts I have for the car to begin with. I've just started taking the car apart this afternoon, I will take pictures as I remove the parts, otherwise let me know what you're interested in and I will prioritize removals accordingly.

    E30 Partout


    S50/ZF 5 speed Complete Swap - Engine/ Transmission/ Cooling system/ Driveshaft - $3000

    Suspension:
    1997 e36 M3 Control Arms/ Spindles/ Brakes (replaced discs and balljoints 6 months ago) - $300
    Treehouse Eyeball Arms (used 6 months) - SOLD
    BW Stainless Brake Lines (used 6 months) - $75
    Rear e36 M3 Brake Adapters 318ti (300mm.de adapters, new discs/Hawk HPS Pads) - $450
    Rear 318ti Trailing Arm(Rear left side) - $75
    Rear Condor Blackbird Kit(Subframe/ RTAB/ Diff bushings) - $175
    Koni Rear Shocks(Used 6 months, great rebound) - $120
    BW Swaybars (no front adjusters) - $400
    Vorshlag Camber Mounts (for Koni shocks/ used 6 months) - $300
    Rear Strut Brace - $60

    Interior:
    E30 Black Sport Seats/ Door Panels (4 door) - $450
    Uncracked Dash - $100
    4 door Black door panels - $40

    Exterior:
    16x8 style 5's (3 good wheels) - $150
    318ti Antenna (new grommet) - $60





    S62/ 6 Speed Items

    Good Condition block - $500
    Crank - Sold
    Rods/ Pistons (good condition when removed) - $250 for the set
    Cylinder Heads – ~50,000 miles on them (With documentation of replacement) - $750
    Vanos Assemblies - $Sold
    JB Racing Clutch (has some surface rust from sitting out of the car but only has 1,000 miles on it) - SOLD
    Brecus Motorsports Stage 2 Clutch (1,000 miles on assembly) - SOLD
    Coils (have 4 of them) - $20 each
    Valve Covers (missing passenger side coil cover) - $150
    ITB’s - $200 for the set of 8
    Exhaust Manifolds - $100
    Wiring Harness - $300
    Complete oilpan assembly including pump - SOLD
    Front Timing Covers (upper and lower) - $100
    Starter (good working condition) - $75
    Evolve tuned ECU (Alpha N Tune with secondary air pump delete) – $750
    Heat Exchanger Delete Plate - $150
    Throttle Solenoid - $50
    Injectors + injector rails - $150
    Getrag 420 Transmission (75,000 miles/ has broken rear mounts, however will come with new rear housing) - $1000

    Onto the pictures of some of the parts:























    Last edited by 318isbmw; 09-02-2014, 05:01 AM.
  • Matt-B
    The Waffler
    • Jun 2009
    • 3856

    #2
    bump for a great seller, goes out of his way, to accommodate people.


    Please leave feedback below, thanks

    http://www.r3vlimited.com/board/showthread.php?t=358170

    Comment

    • Wschnitz
      R3V OG
      • Dec 2011
      • 8089

      #3
      I want this thing so bad, would be so sweet in an E36 Sedan.
      1989 BMW 325is | 2019 Ford Ranger FX4
      willschnitz

      Comment

      • 318isbmw
        Moderator
        • Nov 2005
        • 2841

        #4
        Originally posted by Wschnitz
        I want this thing so bad, would be so sweet in an E36 Sedan.
        It could be yours...

        Comment

        • e30austin
          I waste 90% of my day here and all I got was this stupid title
          • Sep 2010
          • 15382

          #5
          Originally posted by 318isbmw
          It could be yours...
          He's too much of a purist, anyway.

          Someone fund this man's next endeavor!


          Comment

          • Wschnitz
            R3V OG
            • Dec 2011
            • 8089

            #6
            Originally posted by Austin!
            He's too much of a purist, anyway.

            Someone fund this man's next endeavor!
            :p the only reason the e30 doesnt have an m54 is money, been waiting for the right motor to pop up for me to rebuild.
            1989 BMW 325is | 2019 Ford Ranger FX4
            willschnitz

            Comment

            • 318isbmw
              Moderator
              • Nov 2005
              • 2841

              #7
              Because there is more money in the parts individually, I'll probably part it out next weekend if no one is interested in the entire package by then.

              Comment

              • spiDmang
                No R3VLimiter
                • Nov 2010
                • 3941

                #8
                Oh no!! The cosmos sedan got wrecked?? :(

                Bump for a good guy
                -Brad, AlphaTeam Motorwerks, LLC
                91' 318iS - S54/6MT Swapped
                08' E90 M3 6MT - Daily
                04' Chevy Duramax CCLB - Work Truck/Hauler


                Originally posted by IronJoe
                Alpha Team: running through e30s, gringo icebergs, and 19 yr olds.

                Originally posted by 2mAn
                Brads a standup guy even though he likes buttsex

                Comment

                • 318isbmw
                  Moderator
                  • Nov 2005
                  • 2841

                  #9
                  Originally posted by spiDmang
                  Oh no!! The cosmos sedan got wrecked?? :(

                  Bump for a good guy
                  Yeah, got t boned pretty hard.

                  Comment

                  • 318isbmw
                    Moderator
                    • Nov 2005
                    • 2841

                    #10
                    Tough to sell just a clump of parts, so going to part out the motor and transmission.

                    Comment

                    • mooseheadm5
                      Grease Monkey
                      • Apr 2009
                      • 375

                      #11
                      Definitely want the crank. Might want more, but I need to do research.
                      -P

                      Moosehead Engineering

                      Comment

                      • 318isbmw
                        Moderator
                        • Nov 2005
                        • 2841

                        #12
                        PM replied

                        Comment

                        • 318isbmw
                          Moderator
                          • Nov 2005
                          • 2841

                          #13
                          Vanos sold, crank is pending.

                          Comment

                          • EN318isPDX
                            R3V Elite
                            • Oct 2007
                            • 4373

                            #14
                            Willing to sell just the bell housing?

                            Comment

                            • mooseheadm5
                              Grease Monkey
                              • Apr 2009
                              • 375

                              #15
                              I never got a PM from you on the crank.
                              -P

                              Moosehead Engineering

                              Comment

                              Working...