Official Tri-State Parts for Sale Thread!!
Collapse
X
-
New Year's bump ;DPutting my s50 parts back up for sale:
1. S50 cylinder head with approximately 112k miles. Camshafts were sold separately. Sale includes BNIB updated valve retainers and seals. I would recommend having a machine shop install everything. I will also include an Elring brand headgasket to whoever buys the cylinder head. $200
2. S50 engine block, almost complete. The only parts missing are the alternator and belt tensioners. Piston #6 (closest to the firewall) shows signs of either a dropped valve or somehow contacting the valves, I found this out after pulling the engine and separating everything. The grooves on top of the piston are aesthetic and I drove the car for 5 years in this condition and did not notice it until I tore the motor apart to do the headgasket. However, instead of putting it back together I swapped in an s52. $400
Local pickup only, PM me for contact information and more details. Parts are located in Port Washington, N.Y.Leave a comment:
-
-
TR Motorsport C1s Dunlop DZ102 tires. Wheels have no bends cracks or curb rash and look brand new. Tires have about 8k miles on them with plenty of life left.
15x7
205/50r15
4x100
$450obo
Leave a comment:
-
two getrag 220 transmissions asking $250 each
Also have two sport seats missing the front pins they both need reupholstery $200 for the pair
I intake manifold $50
410 open diff $100 has a slight whine
410 viscous $250
I crankshaft $50
E28 m20 steel oil pan new but has a few scuffs from being in the garage $120
I afm and airbox $75
I have pics but my phone won't let me post them, text me 973-287-9165Leave a comment:
-
have an OEM late model stock "i" lip in great shape.
$75
https://www.ecstuning.com/b-genuine-...e/51711945559/Leave a comment:
-
FS: 2002 325i sport/cold, oxford green/brown, 76k...CT
Basics:
325i sport/cold
76k
oxford green/brown
*PA Salvage title*
$2800 obo, very very very negotiable
needs cosmetic work
Located in Windsor, CT. Check out the full ad/pics in the for sale section;
Leave a comment:
-
HID kit (H1) for sale...fits euro ellipsoids:
-Morimoto Elite ballast kit (Used 1yr)
https://www.theretrofitsource.com/hi...oto-elite.html
-but comes with brand new DDM Tuning 5500K Ultra HID bulbs (H1)
SOLDLast edited by audiquattrot; 12-16-2016, 10:58 AM.Leave a comment:
-
-
-
Looking for a rust free driver side front fender! Can have damage just need the rocker panel section to be rust free thanksLeave a comment:
-
I have a set of kamotors ultra wide fender flares, never installed. They add 1.9"f, 2,5"r. Asking 375
Link to product: kamotorsperformance.com/kamotors-ultrawide-fender-flares/
Sent from my iPhone using TapatalkLeave a comment:
-
Guest replied18in 3pc authentic Racing Harts jdm C2 4x100/4x114 rims made by Work.
full set for sale
4 rims
4 nitto 555 extreme tires few mths old.215/35/18 like new
no center caps
1st $1300 the takes the set picked up


************************************************** ******************
trade 2 of my 17x9 bbs replica rc str 606 deepdish wheels for two in 17x8 .
im looking to make a staggered set. must be mint/like new in the same color.
et22
4x100
4x114
17x9
local trade only


************************************************** *****************
BMW Style 121 6 Series Ellipsoid Alloys
Specs:
Front wheels are 19x8.5" wide et +14mm offset.
Rear wheels are 19x9" wide +18mm offset.
1 rim has a small inner hairline crack and was fixed
1 rim has two small inner hairline crack and was fixed
FULL SET
5 RIMS
4 CAPS
3 TIRES
Price: $950 takes all.
leave contact when ready to buy and pickup
$900 THIS WEEK




[/
************************************************** ****
18IN bmw M3 STAGGERED style67 WHEELS/TIRES $700 or TRADE
the wheels have some minor nicks and blemishes from its old age.
4 wheels
4 caps
4 good front tires
LOOKING TO TRADE FOR OTHER staggered WHEELS WITH TIRES in good ready to use shape
18IN OR 19IN 5X120 ONLY .....
if you dont have a trade then $700 takes the set

************************************************** *******
two 255/35/18 pirelli low profile tires $325
good tread like new ready to mount and use. $325 takes the tires.
suffolk l.i pickup or buyer pays shipping cost

************************************************** ***********
17" rare STAGGERED monoblock ac schnitzer typeII 5x120 rims $1500
staggered 5x120 17 inch ac schnitzer type 2 monoblock rims.
17X8.5
17X9.5 *hard to find very rare
4 staggered rims
4 caps
$1500 cash takes the set. price is firm.




***********************************************
rotella f105 235/50/18 - $35
good tread used tire
up for sale is 1 rotella f105
235/50/18


************************************************
18"5x112 tsw bremma amg rims/tires trade
1 rim has a small inner crack and was fixed from previous owner
these are amg bremma reps 18x8.5in 5x112. tires are 225/40/18
with good tread
WILL TRADE FOR OTHER 18IN WHEELS WITH POLISH LIP. MUST HAVE TIRES NO CHROME
5X112 ONLY.

************************************************** *
18INCH 2010 BMW 5x120 e92 staggered rims/tires
Selling a set of 18" staggered wheels (style 189) and tires
Front: (2)-18x8 ET34 (225/40/18) 1nexen and 1 pirelli
Rear : (2)-18x8.5 ET37 (255/35/18) new pirelli's
no bends or cracks
4 Center caps
4 tires
4 rims
$1200 needs very minor refurbishing due to minor edge curbs from previous owner....
Local pick up suffolk longisland
trades considered for 18in or 19in staggered 5x120 wheels/low profile tires
must have good tires and wheels in good shape.

**************************************************
2004 VOLVO 5x108 RIMS/tires $TRADE
2004 VOLVO 16in 5x108 alloy RIMS TRADE............... for other volvo wheels.
good shape with tires. 16in and up
4 good tires
4 caps
4 rims
these are in mint shape ready to use. local trade only.
[
Leave a comment:
-
Putting my s50 parts back up for sale:
1. S50 cylinder head with approximately 112k miles. Camshafts were sold separately. Sale includes BNIB updated valve retainers and seals. I would recommend having a machine shop install everything. I will also include an Elring brand headgasket to whoever buys the cylinder head. $200
2. S50 engine block, almost complete. The only parts missing are the alternator and belt tensioners. Piston #6 (closest to the firewall) shows signs of either a dropped valve or somehow contacting the valves, I found this out after pulling the engine and separating everything. The grooves on top of the piston are aesthetic and I drove the car for 5 years in this condition and did not notice it until I tore the motor apart to do the headgasket. However, instead of putting it back together I swapped in an s52. $400
Local pickup only, PM me for contact information and more details. Parts are located in Port Washington, N.Y.Leave a comment:

Leave a comment: