User Profile

[Vincenze]

I bought the Delphi HP10241 from RockAuto.
https://www.rockauto.com/en/parts/de...assembly,10147

It says Made in USA.

[Vincenze]

You can make them yourself.
You'll need a bubble flaring tool: https://www.autozone.com/test-scan-a...kit/592261_0_0

...

[Vincenze]

NTK speed sensors are available.
Though, they are expensive, but provide Toyota quality.

https://ngksparkplugs.com/en/part-finder...

[Vincenze]

The pink springs are for the regular E30 with AC. At least, that was true for the 90s models.

There was a part number at the top of my front springs. I googled it and found more information...

[Vincenze]

Something like this?
https://www.classiceuroparts.com/pro...egory/bmw/e30/

...

[Vincenze]

A brand new genuine hood costs $500.
A new aftermarket one costs $200: https://www.jegs.com/i/Sherman-Parts...-28-0/10002/-1

If you hood is really mint and somebody wants it in the...

[Vincenze]

If it's just the connector, you can try to glue it back.
Try Super Glue and then use scotch tape....

[Vincenze]

If it's been sitting in Phoenix for 2 years, It's better to change the timing belt.
Then, it'll be easy to change the water pump and old hoses.
You can use a radiator flush to clean more rust...

[Vincenze]

I just checked. No aftermarket pumps are in stock. It was usually Airtex, now it's not available....

[Vincenze]

I lift the front of the car with a jack and turn on the heater to the maximum position.
I disconnect the hose that goes down from the thermostat and fill it with the coolant completely.
When...

[Vincenze]

It should look like this if you have a double pump setup.
The ground connector must be connected to the pipe.

https://www.ebay.com/p/1111136436?ii...14&chn=ps&noro...

[Vincenze]

Is it the same color?

They say that BMW will offer new carpets and M3 panels.

...

[Vincenze]

https://www.r3vlimited.com/board/for...emium-gas-tank

[Vincenze]

You'd better buy a Harbor Freight press for the ball joint replacement job in addition to the assortment of pipe adapters from the ball joint kit.

You'll need some tools to insert new bushings...

[Vincenze]

I believe the computer is the same....