This is a video tutorial on how to install OEM IS Side Skirts on your E30. We tried to be as clear and straightforward as possible, but obviously are not trained professionals. Use your best judgement when working on your car. There may be other ways to do this job, but this worked very well for us.
!!This job requires for you to drill into your car's rocker panels. Be VERY careful...measure twice, three and four times...drill once!!
Tools needed:
- Drill
- 3/8" or Step Drill bit
- Center Punch
- Phillips Screwdriver
- 1/4 Ratchet
- 8mm Socket
- Measuring Tape
- Masking Tape
- Spray Paint / Sealer / Primer (black)
- Sharpie
We could not find a metric rivet tool fitting to utilize the metric rivets that came with the installation kit. We therefore sourced some bumper screws locally... they turned out to be 1/4" which is very close to the hole sizes at the back of your sideskirt. Again, this is what WE felt was a good solution...there are other ways to do this.
Here is the video
Click here for DIY: How to Install E30 IS Side Skirts (video)
!!This job requires for you to drill into your car's rocker panels. Be VERY careful...measure twice, three and four times...drill once!!
Tools needed:
- Drill
- 3/8" or Step Drill bit
- Center Punch
- Phillips Screwdriver
- 1/4 Ratchet
- 8mm Socket
- Measuring Tape
- Masking Tape
- Spray Paint / Sealer / Primer (black)
- Sharpie
We could not find a metric rivet tool fitting to utilize the metric rivets that came with the installation kit. We therefore sourced some bumper screws locally... they turned out to be 1/4" which is very close to the hole sizes at the back of your sideskirt. Again, this is what WE felt was a good solution...there are other ways to do this.
Here is the video
Click here for DIY: How to Install E30 IS Side Skirts (video)
Comment