If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ohhh! i think you're talking about a rear upper strut bar.
Eric Lukas(*LukasBMW) used to sell them for $40, but now everyone here thinks they've appreciated in value. I'd buy the IE one if i had to purchase it again since I the Lukas bar is NLA.
I hear the South Bay Independet ones are supposed to be the best, I can never remember the website though. They look like the Turner ones, but in 2 pieces, so installation is supposed to be much easier. Someone shoot out the website please...
GET THE IE SWAY BAR SET. It is by far the most beautiful set of swaybars that money can buy for the e30. 25mm hollow 3-way adjustable front bar with adjustable links, 22mm hollow completely adjustable rear bar with adjustable links. The bars are stronger than other bars but lighter as well. The reinforcements that go through the trunk are fucking beefy as hell. I LOVE THEM.
No, its the reinforcement that goes where the sway bar mounts to the chassis and bolts thru the trunk pan.
Just trying to get a feel for what folks are using.
Gotcha.
Well, i've heard of people getting some that require welding. However I don't know which kind they used so i'm not much help.
All i've used are the mounts that come with the Suspension Techniques kit. The mount has a backing plate that is held together by a nut and bolt. It held up fine on my 318 autoX car.
No, its the reinforcement that goes where the sway bar mounts to the chassis and bolts thru the trunk pan.
Just trying to get a feel for what folks are using.
Gotcha.
Well, i've heard of people getting some that require welding. However I don't know which kind they used so i'm not much help.
All i've used are the mounts that come with the Suspension Techniques kit. The mount has a backing plate that is held together by a nut and bolt. It held up fine on my 318 autoX car.
I'll be using the same ST kit on my new E30.
Not sure, but I think you're still confused. The mounts you're talking about are the weld in triangle pieces that reinforce the trailing arms. He needs the beefier bolt in reinforcements the bolt up to the body.
Not sure, but I think you're still confused. The mounts you're talking about are the weld in triangle pieces that reinforce the trailing arms. He needs the beefier bolt in reinforcements the bolt up to the body.
I will always be confused. Born that way, will live and die that way.
Thanks for the clarification on the welded mounts for the swaybar links.
So my point: The ST mounts worked fine with their 19mm bar.
Comment