Announcement

Collapse
No announcement yet.

OBD II S52 swap no start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    OBD II S52 swap no start

    Good morning,
    Just want to know what you think. I have a 1990 325i, S52 swap. I bought the harness from Markert Motor Works, and the DME from TRM. When I turn the engine over I do get fuel, checked the Schraider Valve and there's fuel. I know the injectors work because I pulled the plugs and they are clean but smell of fuel. It will turn over, but nothing. I've noticed that I can turn it over without depressing the clutch pedal? I've jumped the clutch connector and turned it over but still nothing? Any help or input would be greatly appreciated.

    #2
    Basic procedure is first read BMW factory codes. Second check if there is spark, check if there is injector spraying, check compression.

    Comment

    Working...
    X