Cool
Announcement
Collapse
No announcement yet.
M30 OEM Turbo project
Collapse
X
-
This will be a cool build ..!! I think part of the shock tower bracing needs to be trimmed to fit the wastegate and turbo might interfere with engine arm bracket.Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
____________________________
E-mail Panayiotisx2@gmail.com
Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL
Comment
-
Originally posted by Good & Tight View PostThis will be a cool build ..!! I think part of the shock tower bracing needs to be trimmed to fit the wastegate and turbo might interfere with engine arm bracket.
Comment
-
Time for some more updates! Still rebuilding the turbo.
Next step: remove compressor plate held on with 4 torx T-40 bolts:
Once removed, you can see the 3/4 thrust bearing. I had to clean and scrub quite a bit just to get to this, it was covered in charred oil and junk. Also note how blackened the bearing is. It's supposed to be shiny, bright bronze.
Next up: use a pick to remove the thrust bearing, snap rings, and bushings.
OK kids, everyone in the pool!
The main shaft was pretty dirty and had some burnt crap on it, so before everything can be put back together it needed to be cleaned and polished up a bit. Thankfully I had some 3000 grit wet sandpaper laying around. Chuck it up in a drill and 30 seconds later, voila!
I've been working on my shaft polishing skills, Blunt will be so pleased! :giggle:
Comment
-
I like this thread keep on doing what your doing
sub'd
Comment
Comment