I’m in for CnC [emoji13]
Announcement
Collapse
No announcement yet.
'90 325i S52 to S54 '06 Z4M w/ ZF 6 Speed
Collapse
X
-
Doing the R3v BBQ with great friends, and experiencing the redline a couple more times. The added guages via BavRest are bright now after removing the tint, as well as a CEL I can see.
Adjusted the redline for cold to be 5k and hot 7600 for time to shift. The E46 adjustable LED redline differs for gears 1 and 2 since the driver has less time to react.
I am loving having cruise control, and soon AC.
Airventdisplay.no has Rev 3 boards incoming such that we will have full MK60, Canbus and kbus support so that AC will also work, and his communication has been awesome.
I need to get my front 6pot wilwood brakes and some aggressive street pads due to the Manual brakes
Going to wire the rev lights dimmer switch into the headlight switch w a relay so that I do not have to press another button.
It begs to be tracked and documented.
Last edited by R3Z3N; 04-21-2019, 12:08 PM.
Comment
-
I thought you were using the Gpetersen CAN controller for your setup? Or are you going to switch because of the MK60 integration?IG: deniso_nsi Leave me feedback here
Comment
-
^Currently I am.
However correct, for full MK60 integration along with full data logging and the ability to stream the data to a webserver for output and a second CANbus line with more throughput for more "channels" and quicker refresh rates.
Biggest reason? Support. I am stoked Gpetersens solution works, but many questions go unanswered.
Comment
-
Finally added the day/night switch to the center console for the shift light brightness. Decided against wiring into the headlight switch via a relay as I may want to adjust it for track use too and not draw more power from the alternator via the headlights. I'll post a pic tomorrow.
Still trying to figure out the oil pressure guage jumping around. Bavrest said to check ground, which is good, I am guessing the sender but they wont say what voltage range and PSI IE 1-4 or 1-5v or 100 or 150psi.....I want to try a better sender.
Comment
-
Originally posted by R3Z3N View PostFixed a blown speaker, so now all 1000 watts work ;-)
This weekend will redo wiring for my oil pressure guage, but it worked for the drive today to Costco:
This ugly blue cart sooooo doesn't belong in the pic:roll:
But perfect example how good e30 looks tho...
Comment
-
^a tip, quote without the pics ;-) Then we don't have to scroll through the same blue car 2x :-D
BTW, finally finished my GeorgeGraves Narrow and Wideband install along with the rear BMW mudflaps.
Trying to find time to double check 1 wire for the AC system, drop off for the AC hose then list this for sale.Last edited by R3Z3N; 05-06-2019, 10:13 PM.
Comment
-
So I got word that AC works, 40º from the vents! Corrected my alignment, which corded my fronts in the ~1k miles that I have driven the car, and the tires were new when I had bought them prior to engine install. Had 0 toe all around, 9º of caster and 3º of camber all around setup for streetable driving.Last edited by R3Z3N; 06-18-2019, 06:32 PM.
Comment
-
2 videos added, talk and drive and walk around and submitted to Bring a Trailer
Walk Around
Talk and DriveLast edited by R3Z3N; 06-23-2019, 09:31 PM.
Comment
Comment