Installed new Miller Maf with chip. Everything checks out ok. As soon as you start it the idle goes from 700 to 1500. If I unplug the maf the car idles normal. It’s a gen 3 maf kit. When I checked voltage at idle I have 1.6v at pin 2 on the maf plug. The troubleshooting guide says I should have .8 volts. Now for the gen3 type 1 that’s normal but not for type 2 which is what I have. Could I have the wrong chip ?
Announcement
Collapse
No announcement yet.
Hunting idle with Miller maf installed.
Collapse
X
Comment