I accidentally tore a green and violet wire while installing the clutch pedal and brake pedal from a non airbag pedal box. I was swapping my 1991 325i from auto to a manual with parts from a 1987 325e. Now my brake light remains on. I recently managed to reconnect the wires but had to use some spare wire to makeup the torn area of the wire. It’s really difficult to get to and there’s only enough space for one hand and you barely visible see it behind all the wires. I used twist on wire connectors since the area was very tight and difficult to get to without removing the dash. The issue is the light remains on. Should I replace the brake switch light? I'll try to post the wiring diagram
Announcement
Collapse
No announcement yet.
Brake lights stay on
Collapse
X
-
While swapping out my pedals, the brake switch gave out on me, was super old. Replacing it won't hurt as they are not too expensive new.Transaction Feedback
Various E30 Parts for Sale!
Z3 Steering Racks for Sale!
Current Fleet:
-1987 Delphin Grey 325iS
-1989 Bronzit Beige 325iS
Comment