Laser Cut Gauge Panels --- new styles!

[jaywood]

E30 Laser Cut Gauge Panels

All gauge panels are laser cut and precisely made to fit your OBC, Radio, Center Vent, Driver side vent, and Ashtray of your E30 BMW.

*The Radio gauge panel also fits the E36 BMW*
PLEASE READ: There will be a PayPal + Shipping Charge on all refunds.

All gauge panels are offered in 2-1/16".

To Order:
All prices listed are the prices shipped. There are no shipping charges. Paypal me at statesdutttt@yahoo.com
Please include your username and what gauge panel/s you are ordering.

MEASURING YOUR GAUGE: If you have a caliper, measure the diameter of the gauge closest to the bezel.
If you don't have a caliper, wrap a strand of string around the gauge and take that measurement and use this formula.
(Measurement of string) DIVIDED by 3.14 = Gauge Diameter



NEW: Add a digital voltage meter to your panel for $10! It takes the place of one hole on any panel. The display is red LED. Operating voltage: 4.5 ~ 30V. (NOTE: This voltage meter WILL NOT fit in the OEM switch locations (think Hazard switch) because it is too big. It will fit w/ modification, but to make things easier I sell this voltage meter: (Add $25)Link Here. Please include which voltage meter you are ordering)





If you would like one of these, please add $10 to the total price and state you are adding a voltage meter in the Paypal notes. The voltage meter is included!





On Board Computer Gauge Panel: $18 shipped









Center Vent Gauge Panel: $22 shipped







NEW:Center vent with slots for A/C. Part number to include in paypal notes: GP1005G $22 shipped



Radio Gauge Panel: $20 shipped





Ashtray Gauge Panel: $18 shipped

-The ashtray unit must be modified to accept gauges. Can accommodate 2 gauges size 2-1/16". Great place to have switches. Blank customizable panels are available upon request.





Driver's Side Vent Gauge Panel: $12 shipped





Please PM me with any questions that you have. All orders will be shipped out within 48 hours of the purchase (M-F)

Customizable panels are available. I am going to be cutting all of the panels in house so I can design/cut whatever you have in mind. PM for details on that.



Thanks guys

I have used several members pictures here. If you would like me to take them down please let me know!

[phenryiv1]

Can you make the OBC panel to fit 4 window switches?

[jaywood]

I can, yes. I'll have to make sure it will fit though. Is there enough room on the backside to fit 4 switches?

I've got all of these ready to ship out guys!

[jaywood]

Bump!

[phenryiv1]

I can, yes. I'll have to make sure it will fit though. Is there enough room on the backside to fit 4 switches?

I've got all of these ready to ship out guys!

There is room in the back for the switch bases, and enough wire to get the bases up there.

I am doing a rallycross car and have the whole interior out. The switches are currently taped in a bundle and hang on the passenger side floor. If I could put them all in one panel up on the dash, that would be a lot cleaner and I'd have less wires hanging out on the floor.

[jaywood]

Yep. I can do it. I'll send you a pm!

[Robert]

Bump for good quality Gauge Panels.

[jaywood]

Thanks Robert!

I have all of these in stock, cut, and ready to ship out!

OBC:



Ash tray:



Radio:



Center Vent:



Not sure what to call this one, lol:

[jaywood]

Bump ;)

[jaywood]

All orders will be going out tomorrow!

Bump!

[jaywood]

Ttt ;)

[jaywood]

All orders have been shipped out!

I've got plenty more cut that are ready to ship out!

[dubseven]

Can you do an OBC with a single 2 1/16 gauge and two switches?

[jaywood]

I seriously doubt it. I don't think there is enough room there.

[vpilarrt]

Can you do an OBC panel with 2 window switches side-by-side like this?