Very nice work OP! Great job with the wiring too! Nice and neat, this is a very detail oriented build and should be awesome when done.
Announcement
Collapse
No announcement yet.
E30 M42 Touring -92 // bagged + turbo build thread ** #119 Dyno 593hp/611nm @hubs
Collapse
X
-
Originally posted by jeenyus View Postgreat build! love how it's coming together.Originally posted by CorvallisBMW View PostLove all the new hotside bits, the exhaust wrap looks great!Originally posted by ccsdo5 View PostVery nice work OP! Great job with the wiring too! Nice and neat, this is a very detail oriented build and should be awesome when done.
meanwhile here is some pics from last summer!
Last edited by krisu; 05-08-2017, 08:31 AM.
Comment
-
Hi all, something been done! :p
i will use m42 pilot bearing, but my problem is that transmissions clutch axle is not long enough for the pilot bearing.. i need to make an extension to make it fit..
and its done!
new m50 flywheel in place. starter ring from m42, its the same as m50 etc :)
pressure plate and clutch installed!
gearbox in place , new 320d clutch slave cylinder and throwoutbearing.. and new oils!
everything done, engine back to the bay!
Last edited by krisu; 07-21-2017, 06:22 AM.
Comment
-
aem ethanol fuel pump
an fittings to fuel lines
china catchcan, its so small, i might need to replace it LOL
current situation, engine wiring yay..
standalone in orginal location
to be continuedLast edited by krisu; 07-21-2017, 06:23 AM.
Comment
-
I have th same oil catch can, but want to make it filter better. Have any ideas?318iS Track Rat :nice: www.drive4corners.com
'86 325iX 3.1 Stroker Turbo '86 S38B36 325
No one makes this car anymore. The government won't allow them, normal people won't buy them. So it's up to us: the freaks, the weirdos, the informed. To buy them, to appreciate them, and most importantly, to drive them.
Comment
-
Originally posted by downforce22 View PostI have th same oil catch can, but want to make it filter better. Have any ideas?
Comment
-
Originally posted by krisu View Postwhat do you mean? why do you want to filter it better? are you running it back to the intake manifold?318iS Track Rat :nice: www.drive4corners.com
'86 325iX 3.1 Stroker Turbo '86 S38B36 325
No one makes this car anymore. The government won't allow them, normal people won't buy them. So it's up to us: the freaks, the weirdos, the informed. To buy them, to appreciate them, and most importantly, to drive them.
Comment
-
Originally posted by downforce22 View PostWhen I opened mine up it just had a couple of baffles. I wanted to condense more of the oil vapor so I added some scotch brite pads as a filter material but it still vents lots of oil vapors. I was wanting to add a better filter material to the center of the can to help catch more oil. I have now drive over 1000 km with mine so I should probably check to see if there is any oil in the bottom of the can.
i am going to try not to use any filter in there. it will vent the oil vapors to atmosphere
Comment
-
shortened driveshaft with bigger flange for 96mm guibo
Last edited by krisu; 07-21-2017, 06:24 AM.
Comment
-
shifter assembly modified, now it works.. needed to weld shifter arm to different angle and also the shift selector rod..
couldn't use the original shift lever, had to put some random short shifter in there!
Last edited by krisu; 07-21-2017, 06:24 AM.
Comment
-
hello!
car is almost complete! engine management wiring done, and everything bolted back to the bay.
had a small panic because my clutch didnt disengage, well thank god it was only the slave cylinder that had to be replaced. i were worrying that i need to take the trans out one more time. well i didn't, the e36 328i slave cylinder works just fine!
everything seems to be working, it was time to go dyno and see how much whp we get! :D
unopened engine with original gasket and head bolts. lets see how long will this last! i got arp headbolts and athena mls waiting
its pretty damn fun to drive!! videos from dyno in my instagram!
Last edited by krisu; 07-23-2017, 01:56 PM.
Comment
-
Originally posted by krisu View Post
Comment
-
Originally posted by Powling View PostI recently picked up a second valve cover and intake to powder coat them black, but this pic might have made me change my mind! The clean silver looks awesome.
Originally posted by econti View PostWhat turbo is it again? Very impressive for unopened engine
Comment
Comment