R3VLimited Forums

Go Back   R3VLimited Forums > E30 Technical Forums > Engine & Drivetrain > Alternative Tuning / W.A.R / Megasquirt / etc

Reply
 
Thread Tools
Old 12-13-2016, 03:54 PM   #1
kyleconstantine
E30 Enthusiast
 
Join Date: Apr 2014
Location: NJ/Philly
Posts: 1,172
LC-2 and Tunerstudio off by .4

Hey, so I've been trying to troubleshoot this issue but my LC-2 gauge and is consistently off from what tuner studio is reading. I've read up on it and people with the LC-1 separate the heater ground from the sensor ground to resolve this issue, but my LC-2 only has one ground. Where is the heater ground on the LC-2. The single ground I have is connected to both grounds in the original wiring harness. Any ideas?
kyleconstantine is offline   Reply With Quote
Old 01-05-2017, 06:28 AM   #2
downforce22
R3VLimited
 
downforce22's Avatar
 
Join Date: Aug 2009
Location: Colorado Springs, CO
Posts: 2,754
If you calibrate your oxygen sensor, you can change the input to custom. Generally it is 0-5 volts output and mine was off by a few points also. I just adjusted it to be a custom sensor between 0 - 4.7 volts and that adjusted it to be spot on. The gauge should be accurate so use that as the guide to try to match. I'm running the AEM UEGO, but its the same principle.
downforce22 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:52 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2004 - 2020 R3VLimited LLC