Skinny-ing AND Widening the E30

[mulletman]

139th post, rather new member, not new to bmw, thanks.

ok my first e30 its an 1990 325is, not even fully bought yet. this is a project and will be built taking my time & sourcing parts.

so that said, i want to skinny-ify the front of the car, not just with e21 fenders or arches, shrink the front to 56" ish ( the width of the OG Mini Cooper ) a stock coup is 65.4", that's 9.4" under stock & 4.7" on either side of the trans tunnel, ( i have read not to cut into the tunnel, i will research this further ) that is cut out material most unlikely from a donar...

then i want to widen the rear of the car, not just with M fenders or arches, widen the rear to 73" ( the width of the e31 ) a stock coup is 65.4", that's 7.6" over stock & 3.8" on either side of the diff mount, ( i have read not to cut into the tunnel, i will research this further ) that is welded in material most likely from a donar...


had a question about suspension geometry, for folks who could be helpfull in this area an i going to through off the current geometry, can camber caster adjustment help, engine is TBD.

thanks again,

[AbsorbantNut]

[thebutcher37]

I am following both threads.

http://www.r3vlimited.com/board/showthread.php?p=3497830#post3497830

[sarcasmkillsme]

Possibly one of the worst ideas I've heard in awhile.

[LJ851]

Put the pipe down , mulletman.

[mulletman]

Put the pipe down , mulletman.

You can't make me.

[bmw325csi]

Killed it

[decay]

so you basically want to make an e30 deltawing?

[AZRRC]

so you basically want to make an e30 deltawing?

THIS

best idea ever

[deutschman]

This guy can not be for real. Who's fucking with us?

[Kevinl]

What would be even cooler is narrow the passenger side & widen the drivers side

[mulletman]

What would be even cooler is narrow the passenger side & widen the drivers side

Damn! Why didn't I think of that?!

[Eddie Lives On]

What would be even cooler is narrow the passenger side & widen the drivers side

McLaren F1 style Gordon Murray would be so freakin' proud

[TobyB]

It's pronounced Bott- Hell.

t