Rear Pop Out Window "weather seal"

[dinanm3atl]

On the rear pop out windows on an 89 e30

There is an "inner" seal I guess and an "outer" seal... Well my driver side has both of these...

The passenger side only has the inside and I think that is where my wind noise is coming from.

How do I replace this?

[Beej '86 325es]

I'm reviving this ancient thread.

I've been repainting my trim and replacing the seals. I replaced the main weather seal:


But when the window is closed, you can still see a gap between the inner and outer trim pieces. It looks like there should be a rubber seal in between like there is on the top of the door.

I ordered these two seals also. The ones on the right get inserted into the bottom trim of the pop-out. The one on the left supposedly goes around the top and back, but I don't see how this little thing will help, no matter where you attach it, will help anything at all.


Here's a link to the Parts Catalog:
http://bmwfans.info/parts/catalog/E3...m/vent_window/

Does anyone have a closeup photo of their window seals?

[Chinampa]

I'm interested as well...im putting pop out rears in my '90

[rzerob]

I just put pop outs in my 91, I did a write up for it. Really easy if you have all the parts. I am interested to see what you do OP, Mine work fine now but I am sure I will need to update parts later.

[jeffnhiscars]

Old thread rebump

Can you replace the main seal without removing the inner panel and how do you get to the hinges to get the window off ?

Note I've read the "conversion" threads but already have the pop outs and am just wanting to replace the seals.